Milliways - User contributions [en]

Glow in the Dark Slime

2026-04-19T16:46:55Z

Maltman23: Created page with "= Let's Make Glow-in-the-Dark Slime! workshop = Glow-in-the-dark Slime! '''This workshop will be given:'''    Day ?: ?day, 2?-May-2025, ?:00pm - ?:00am, in Workshop Room       '''at''' [https://newline.gent/ '''Newline 2026]''' '''Materials cost:'''      ''Optional: Donation of 1 € or 2 €..."

= Let's Make Glow-in-the-Dark Slime! workshop =
[[File:Glow_in_the_Dark_Slime_graphic.jpg|right|500px|Glow-in-the-dark Slime!]] 
 
 
 
 
 
 

'''This workshop will be given:''' 
   Day ?: ?day, 2?-May-2025, ?:00pm - ?:00am, in Workshop Room 
      '''at''' [https://newline.gent/ '''Newline 2026]''' 
 
'''Materials cost:''' 
     ''Optional: Donation of 1 € or 2 € welcome!'' 
 

== Abstract ==
''Learn how to make glow-in-the-dark slime!'' 
Making '''slime''' ''is really important''. It is also ''really fun''. 
Making slime that '''''glows in the dark''''' is even more fun. 
I'll have all of the ingredients, including lots of colors (and a super strong UV light) -- so '''let's do it!'''
 ''

== Presenter ==
[http://en.wikipedia.org/wiki/Mitch_Altman Mitch Altman].

== Recipe 1 ==

The following recipe is from: 
[https://destinationscience.org/diy-glow-in-the-dark-slime-for-halloween/ DestinationScience.org] 
 
'''Ingredients:''' 
* 1 cup '''(237 ml)''' warm water 
* 4 ounces '''(118 ml)''' clear non-toxic liquid glue (note: if you use white glue, the slime will be opaque!)
       ''NOTE: 4 ounces = 0.5 cup '''(118 ml)'''''
* 3 tablespoons '''(44 ml)''' green or clear glow in the dark craft paint 
       or: 1 teaspoon '''(5 ml)''' glow powder
* 2 teaspoons '''(10 ml)''' borax (sodium tetraborate or sodium borate, not boric acid)
 
 
'''Steps:''' 
## Stir the glue and 1/2 cup '''(118 ml)''' of the warm water together until the mixture is uniform.
## Add the glow paint (or whatever glow product you’re using) to the glue mixture.
## In a separate container, dissolve the 2 teaspoons '''(10 ml)''' borax in 1/2 cup '''(118 ml)''' warm water. -- It’s fine if it doesn’t all dissolve.
## Stir the borax solution into the glue mixture. Use your hands or a spoon to mix the ingredients together to make the glowing slime. You may have excess liquid, which you can discard.
## Glow products store light and release it slowly, so expose the slime to sunlight or bright lights to see it glow in the dark. Store the slime in a sealed container when you’re not using it to make it last up to a couple of weeks.
 
 
 

== Recipe 2 ==

'''Another Recipe -- with video:'''

[https://www.youtube.com/watch?v=Jrumx7LQViY The Craft Mom YouTube channel] 
[[File:CraftyMomYouTub_thumb.jpg|center|300px]] 
* Add 2 bottles of Elmers School Glue ''(4 oz each, for total of 8 oz '''(237 ml)''') in bowl''
       ''NOTE: 8 ounces = 1 Cup '''(237 ml)''''' 
* Stir in 1 Cup '''(237 ml)''' warm water 
* Stir in several drops of dye 
* Stir in 3.5 Tablespoons '''(52 ml)''' of Glow-in-the-Dark Paint 
* In separate small bowl, add 1 teaspoon '''(5 ml)''' Borax 
             Stir in 0.5 Cup '''(118 ml)''' warm water into small bowl 
* Stir in Borax/water mixture 
* Enjoy! 
 

== Workshop Itinerary ==
* Make glow-in-the-dark slime 
* Enjoy! 

== Registration -- NOT required ==
'''You do not need to register in advance to take this workshop -- just show up early to ensure a seat.''': 

== Required Software ==
None

== Links ==
[https://destinationscience.org/diy-glow-in-the-dark-slime-for-halloween/ First Recipe -- from DestinationScience.org] 
[https://www.youtube.com/watch?v=Jrumx7LQViY Second Recipe -- from The Crafty Mom YouTube channel]

File:CraftyMomYouTub thumb.jpg

2026-04-19T16:45:48Z

Maltman23:

File:Glow in the Dark Slime graphic.jpg

2026-04-19T16:44:44Z

Maltman23:

LED Strips Everywhere

2026-03-31T21:21:00Z

Maltman23: update for EH23

= LED Strips Everywhere for Everyone! workshop =

This workshop will be given: 
   Easterhegg 23, Day 3: Sunday, 5-April, 8:00pm - 9:30pm  

   at the '''Solder Enrichment Center 
 '''NOTE: You do NOT need to register to take this workshop -- please show up early to ensure a seat at the Solder Enrichment Center.''' 
 

== Abstract ==
''Learn how to program LED strips. It's super easy and fun to make your life trippy and beautiful. For total beginners. ''
[[File:LEDstrip.jpg|center|500px|Making an LED strip do its thing]]Learn how to light up LED strips with a cheap Arduino, and make your life trippy and beautiful!
 
'''For total beginners''' -- no knowledge needed at all. 

== Presenter ==
[http://en.wikipedia.org/wiki/Mitch_Altman Mitch Altman].
 

== Full Description ==
[[File:35C3_LEDstrip_tunnel.jpg|center|500px|LED strip tunnel at 35C3, Leipzig, Germany]] 
'''LED strips''' are really inexpensive, and hackers have created many easy methods for controlling them to make way cool patterns and colors. In this workshop you will learn an easy way to control LED strips and make them do what you want. We will take advantage of a very inexpensive Arduino clone to do our work. I'll show you everything you need to know to use existing programs -- as-is, or to hack on -- to control the colors in your world with LED strips.

== Workshop Itinerary ==
* Intro to Red-Green-Blue (RGB) LEDs 
* Very brief intro to Arduino 
* How to use an Arduino to control an LED strip 
* Some demos of programs you can download 
* How to order LED strips 

== Materials cost ==
The workshop is free, but if you would like to partake in the hands-on aspects of the workshop, Mitch will have materials for '''€20'''. 

== Registration -- NOT required ==
'''You do not need to register in advance to take this workshop -- just show up early to ensure a seat.''': 

== Software ==
''Optional'': Bring your laptop if you want to go home with the free Arduino software installed on it. 
Arduino software runs on Windows, MacOS and Linux.: 
[https://www.arduino.cc/en/Main/Software Arduino software]

== Summary ==
     '''What''': Learn to program LED strips and make your life trippy 
     '''When''': 8:00pm to 9:30pm, Day 3 (Sunday, 5-April)  

     '''Where''': Solder Enrichment Center 
     '''Who''': Anyone and everyone can learn to program LED strips. Ages 10 to 100 
     '''Max #''': 35 participants -- '''''This workshop will fill up, so please do arrive early!''''' 
     '''Cost''': €20 for materials 

     '''Instructor''': [https://en.wikipedia.org/wiki/Mitch_Altman Mitch Altman]

     '''website:''' [https://cornfieldelectronics.com/cfe/projects.php#ledstrips LED Strips Everywhere for Everyone!] 

'''Buy a kit to guarantee a seat, or come by early! (And please do arrive early, regardless!)''' 
 
'''''Optional''': Bring your laptop if you want to go home with the free Arduino software installed on it. Arduino software runs on Windows, MacOS and Linux.''

== Links ==
[https://cornfieldelectronics.com/cfe/projects.php#ledstrips More info about the '''LED Strips Everywhere for Everyone!''' workshop] 
[http://www.arduino.cc/ Ardiuno website]

ArduinoForTotalNewbies

2026-03-31T21:10:28Z

Maltman23: update for EH23

= Arduino For Total Newbies workshop =

== ''Learn Arduino using TV-B-Gone as an example project'' ==
 
This workshop will be given: 
   Easterhegg 23, Day 3: Sunday, 5-April, 1:45pm - 5:15pm 

   at the '''Solder Enrichment Center 
 
'''NOTE: You do NOT need to register to take this workshop -- please show up early to ensure a seat at the Solder Enrichment Center.''' 
 

== Abstract: ==

[[File:A4TN35C3.jpg|thumb|right|Arduino For Total Newbies workshop at 35C3]]
[[File:A4TN.jpg|thumb|right|Arduino For Total Newbies workshop 29-March-2015 at Noisebridge]]

''Learn Arduino using TV-B-Gone as an example project'' 
 
You've probably heard lots about [http://arduino.cc/ Arduino]. But if you don't know what it is, or how you can use it to do all sorts of cool things, then this fun and easy workshop is for you. As an example project, we'll be creating a [http://www.tvbgone.com TV-B-Gone] remote control out of an [http://arduino.cc/ Arduino] you can take home with you.
 
'''When''': 
   Day 3 (5-April, Sunday): 1:45pm - 5:15pm


      at the '''Solder Enrichment Center''' 

'''More info''' on the Arduino For Total Newbies workshop page: 
[http://cornfieldelectronics.com/cfe/projects/tvbg_arduino/tvbg_arduino_workshop.php Arduino For Total Newbies workshop page]

== Full Description: ==
'''[http://arduino.cc/ Arduino]''' is an amazingly powerful tool that is very simple to learn to use. It was designed so that artists and non-geeks can start from nothing, and make something cool happen in less than 90 minutes. Yet, it is powerful enough so that experienced expert geeks can use it for their projects as well.

This workshop is easy enough for '''''total newbies''''' to '''learn all you need to know to get going on an Arduino.'''

Participants will make their own Arduino clone, and set it up on solderless breadboards to make their own [http://www.tvbgone.com TV-B-Gone] remote control to turn off TVs in public places -- a fun way to learn Arduino (and electronics) basics. Bring your laptop, if you can.

Taught by [http://en.wikipedia.org/wiki/Mitch_Altman Mitch Altman].

''Big thanks to Ken Shirriff, who came up with the original [http://www.arcfn.com/2009/12/tv-b-gone-for-arduino.html TV-B-Gone for Arduino].''

'''''Optional''''': Bring your laptop if you want to go home with the free Arduino software installed on it. 
Arduino software runs on Windows, MacOS and Linux._ 

'''Materials costs''': 
The workshop is free, but if you would like to partake in the hands-on aspects of the workshop, Mitch will have materials for '''€40''' (useful for making many different cool projects).

'''Workshop page:''' 
[http://cornfieldelectronics.com/cfe/projects/tvbg_arduino/tvbg_arduino_workshop.php Arduino For Total Newbies workshop page]

== Workshop Itinerary ==
* Intro to Arduino

* Very short lesson to learn everything you need to know about electronics!

* Then we will learn to solder. Don't let this scare you! I've taught tens of thousands of people to solder, most of whom have never made anything before in their lives. It is actually a very easy skill to learn. It is also very useful.

* Then we will each make our own Arduino clone from a kit made by Samurai Circuits: [https://cornfieldelectronics.com/cfe/u_do_it_duino_complete.php U-Do-It-Duino].

* Now that we each have our own Arduino board, we will set up the free and open-source Arduino software on our laptops (if you bring one) -- Windows, Linux, and MacOS are all fine!

* And then its time to make something and learn how easy it is to use Arduino! I'll (very easily!) show you how to read schematic diagrams, and you'll put together your own TV-B-Gone remote control using your Arduino clone board. We will use a solderless breadboard. These are really useful, and provide a fast, and very easy way to put circuits together without needing to solder.

* Target practice is available all over the world after the workshop.

== Summary ==
     '''What''': [http://arduino.cc/ Arduino] workshop for total newbies, using [http://www.tvbgone.com TV-B-Gone] remote controls as an intro 
     '''When''': 1:45pm-5:15pm, Day 3 (5-April, Sunday) 

     '''Where''': Solder Enrichment Center 
     '''Who''': Anyone and everyone can have fun learning Arduino. Ages 10 to 100 
     '''Max #''': 15 participants -- '''''This workshop will fill up, so please do arrive early!''''' 
     '''Cost''': €40 for materials -- includes everything you need to make your [http://www.arcfn.com/2009/12/tv-b-gone-for-arduino.html Arduino TV-B-Gone]! 
          And you get to bring home your [http://www.arcfn.com/2009/12/tv-b-gone-for-arduino.html Arduino TV-B-Gone] and all materials to play with Arduino at home (or wherever you want). 

     '''Instructor''': [https://en.wikipedia.org/wiki/Mitch_Altman Mitch Altman]

     '''website:''' [http://cornfieldelectronics.com/cfe/projects/tvbg_arduino/tvbg_arduino_workshop.php Arduino For Total Newbies workshop page] 

'''Buy a kit to guarantee a seat, or come by early! (And please do arrive early, regardless!)''' 
 
'''''Optional''': Bring your laptop if you want to go home with the free Arduino software installed on it. Arduino software runs on Windows, MacOS and Linux.''

== Links: ==
'''[http://cornfieldelectronics.com/cfe/projects/tvbg_arduino/tvbg_arduino_workshop.php Arduino For Total Newbies webpage] '''
[http://www.tvbgone.com TV-B-Gone website] 
[http://www.arduino.cc/ Ardiuno website] 
[http://www.arcfn.com/2009/12/tv-b-gone-for-arduino.html Ken Shirriff's TV-B-Gone Arduino project page] 
[https://cornfieldelectronics.com/cfe/u_do_it_duino_complete.php U-Do-It-Duino] 


==Contact==
'''Mitch Altman''': <mitch AT CornfieldElectronics DOT com> 
'''DECT''': 2676 (CORN)

Brain Machine

2026-03-31T21:00:59Z

Maltman23: /* Abstract: */

= '''Make Your Own Brain Machine workshop''' =
[[Image:BrainMachineKids.jpg|center|500px|Fun using Brain Machines]] 
==Dive into the fascinating world of neurotechnology        and construct your very own '''Brain Machine'''! ==
<div style="text-align:center">
== '''''Meditate! Hallucinate! Trip out!''''' ==
</div>
 
This workshop will be given: 
   Easterhegg 23, Day 2: Saturday, 4-April, 7:45pm - 9:45pm 
 
'''NOTE: You do NOT need to register to take this workshop -- please show up early to ensure a seat at the Solder Enrichment Center.''' 
 

== Abstract: ==
[[File:BrainMachineWorkshopFabLabNK.jpg|right|500px|Brain Machine workshop at FabLabNK]] 
 
'''What is a'''
'''[https://cornfieldelectronics.com/cfe/projects.php#brainmachine Brain Machine]?''' 
It's a fascinating device that generates light and sound pulses at brainwave frequencies. These may be able to help you achieve various states of consciousness, such as meditation or improved sleep. 
 
In this workshop for '''total beginners''' we will all make a '''[https://cornfieldelectronics.com/cfe/projects.php#brainmachine Brain Machine]'''
that is preprogrammed with a really nice meditation sequence. As well as a device that can help you relax and meditate, a nice bonus is that ''everyone hallucinates beautiful colors and patterns'' along the way. 

The Brain Machine is totally [https://github.com/maltman23/Brain_Machine_kit open hardware], and created to be hackable, so you can re-program it with any computer, with software that is free to download and use. 

This workshop is for ''**total beginners**'' to learn to solder. 

'''''IMPORTANT NOTE:''''' '''The Brain Machine uses blinking lights, and is not recommended for people who are photosensitive.''' 

'''When''': 
   Day 2 (4-April, Saturday): 7:45pm - 9:45pm

== Full Description: ==
'''Learn to solder''' by making a way-cool, Sound & Light Machine, that will help you meditate, and hallucinate. It can also be re-programmed to help with sleep, and possibly even reduce brain fog. 
 
The '''[https://cornfieldelectronics.com/cfe/projects.php#brainmachine Brain Machine]''' is open hardware, and created to be hackable. 
 
This workshop is for '''total beginners''' to learn to solder. 
 
For ages 10 - 100. 
 
Taught by [http://en.wikipedia.org/wiki/Mitch_Altman Mitch Altman]. 
 
'''''Optional''': Bring your laptop if you want to go home with the free Arduino software installed on it. Arduino software runs on Windows, MacOS and Linux.''

'''Materials costs''' 
The workshop is free, but if you would like to partake in the hands-on aspects of the workshop, Mitch will have Brain Machine kits for '''€25'''. 

'''''IMPORTANT NOTE:''''' '''The Brain Machine uses blinking lights, and is not recommended for people who are photosensitive.''' 

== Workshop Itinerary ==
* Intro to Sound & Light Machines

* Learn to solder. Don't let this scare you! I've taught tens of thousands of people to solder, most of whom have never made anything before in their lives. It is actually a very easy skill to learn. It is also very useful.

* How to re-program your Brain Machine for creating other brainwave sequences

== Summary ==
     '''What''': Make an [https://cornfieldelectronics.com/cfe/projects.php#brainmachine Brain Machine] 
     '''When''': 7:45pm to 9:45pm, Day 2 (Saturday, 4-April) 

     '''Where''': Solder Enrichment Center 
     '''Who''': Anyone and everyone can have fun making the Brain Machine Ages 10 to 100 
     '''Max #''': 25 participants -- '''''This workshop will fill up, so please do arrive early!''''' 
     '''Cost''': €25 for materials 

     '''Instructor''': [https://en.wikipedia.org/wiki/Mitch_Altman Mitch Altman]

     '''website:''' [https://cornfieldelectronics.com/cfe/projects.php#brainmachine Brain Machine kit] 

'''Buy a kit to guarantee a seat, or come by early! (And please do arrive early, regardless!)''' 
 
'''''Optional''': Bring your laptop if you want to go home with the free Arduino software installed on it. Arduino software runs on Windows, MacOS and Linux.''

== Links: ==
[https://cornfieldelectronics.com/cfe/projects.php#brainmachine Brain Machine kit] 
[http://www.arduino.cc/ Ardiuno website] 
[https://github.com/maltman23/Brain_Machine_kit Brain Machine Github page]

==Contact==
'''Mitch Altman''': <mitch AT CornfieldElectronics DOT com> 
'''DECT''': 2676 (CORN)

Brain Machine

2026-03-31T21:00:15Z

Maltman23: update for EH23

= '''Make Your Own Brain Machine workshop''' =
[[Image:BrainMachineKids.jpg|center|500px|Fun using Brain Machines]] 
==Dive into the fascinating world of neurotechnology        and construct your very own '''Brain Machine'''! ==
<div style="text-align:center">
== '''''Meditate! Hallucinate! Trip out!''''' ==
</div>
 
This workshop will be given: 
   Easterhegg 23, Day 2: Saturday, 4-April, 7:45pm - 9:45pm 
 
'''NOTE: You do NOT need to register to take this workshop -- please show up early to ensure a seat at the Solder Enrichment Center.''' 
 

== Abstract: ==
[[File:BrainMachineWorkshopFabLabNK.jpg|right|500px|Brain Machine workshop at FabLabNK]] 
 
'''What is a''' 
'''[https://cornfieldelectronics.com/cfe/projects.php#brainmachine Brain Machine]?''' 
It's a fascinating device that generates light and sound pulses at brainwave frequencies. These may be able to help you achieve various states of consciousness, such as meditation or improved sleep. 
 
In this workshop for '''total beginners''' we will all make a '''[https://cornfieldelectronics.com/cfe/projects.php#brainmachine Brain Machine]'''
that is preprogrammed with a really nice meditation sequence. As well as a device that can help you relax and meditate, a nice bonus is that ''everyone hallucinates beautiful colors and patterns'' along the way. 

The Brain Machine is totally [https://github.com/maltman23/Brain_Machine_kit open hardware], and created to be hackable, so you can re-program it with any computer, with software that is free to download and use. 

This workshop is for ''**total beginners**'' to learn to solder. 

'''''IMPORTANT NOTE:''''' '''The Brain Machine uses blinking lights, and is not recommended for people who are photosensitive.''' 

'''When''': 
   Day 2 (4-April, Saturday): 7:45pm - 9:45pm

== Full Description: ==
'''Learn to solder''' by making a way-cool, Sound & Light Machine, that will help you meditate, and hallucinate. It can also be re-programmed to help with sleep, and possibly even reduce brain fog. 
 
The '''[https://cornfieldelectronics.com/cfe/projects.php#brainmachine Brain Machine]''' is open hardware, and created to be hackable. 
 
This workshop is for '''total beginners''' to learn to solder. 
 
For ages 10 - 100. 
 
Taught by [http://en.wikipedia.org/wiki/Mitch_Altman Mitch Altman]. 
 
'''''Optional''': Bring your laptop if you want to go home with the free Arduino software installed on it. Arduino software runs on Windows, MacOS and Linux.''

'''Materials costs''' 
The workshop is free, but if you would like to partake in the hands-on aspects of the workshop, Mitch will have Brain Machine kits for '''€25'''. 

'''''IMPORTANT NOTE:''''' '''The Brain Machine uses blinking lights, and is not recommended for people who are photosensitive.''' 

== Workshop Itinerary ==
* Intro to Sound & Light Machines

* Learn to solder. Don't let this scare you! I've taught tens of thousands of people to solder, most of whom have never made anything before in their lives. It is actually a very easy skill to learn. It is also very useful.

* How to re-program your Brain Machine for creating other brainwave sequences

== Summary ==
     '''What''': Make an [https://cornfieldelectronics.com/cfe/projects.php#brainmachine Brain Machine] 
     '''When''': 7:45pm to 9:45pm, Day 2 (Saturday, 4-April) 

     '''Where''': Solder Enrichment Center 
     '''Who''': Anyone and everyone can have fun making the Brain Machine Ages 10 to 100 
     '''Max #''': 25 participants -- '''''This workshop will fill up, so please do arrive early!''''' 
     '''Cost''': €25 for materials 

     '''Instructor''': [https://en.wikipedia.org/wiki/Mitch_Altman Mitch Altman]

     '''website:''' [https://cornfieldelectronics.com/cfe/projects.php#brainmachine Brain Machine kit] 

'''Buy a kit to guarantee a seat, or come by early! (And please do arrive early, regardless!)''' 
 
'''''Optional''': Bring your laptop if you want to go home with the free Arduino software installed on it. Arduino software runs on Windows, MacOS and Linux.''

== Links: ==
[https://cornfieldelectronics.com/cfe/projects.php#brainmachine Brain Machine kit] 
[http://www.arduino.cc/ Ardiuno website] 
[https://github.com/maltman23/Brain_Machine_kit Brain Machine Github page]

==Contact==
'''Mitch Altman''': <mitch AT CornfieldElectronics DOT com> 
'''DECT''': 2676 (CORN)

ArduTouch

2026-03-31T20:44:29Z

Maltman23: update for EH23

= '''Music Generation for Newbies / Learn to Solder workshop -- ArduTouch music synthesizer''' =
[[Image:ArduTouch.jpg|center|500px|ArduTouch music synthesizer kit]] 
 
==''Anyone can learn to solder!'' ''And anyone can learn to make music, sound (and noise!) with computer chips!'' All participants will easily learn all of this by making an 
   '''[https://cornfieldelectronics.com/cfe/projects.php#ardutouch ArduTouch music synthesizer]''' from a kit.         '''For total beginners.''' 
 
This workshop will be given: 
   Easterhegg 23, Day 1: Friday, 3-April, 4:15pm - 6:45pm 
 
'''NOTE: You do NOT need to register to take this workshop -- please show up early to ensure a seat at the Solder Enrichment Center.''' 
 

== Abstract: ==
[[File:ArduTouchWorkshop36C3.jpg|right|500px|ArduTouch workshop at 36C3]] 

 
[https://cornfieldelectronics.com/cfe/projects.php#ardutouch ArduTouch] is an [https://github.com/maltman23/ArduTouch open source] '''Ardu'''ino-compatible music synthesizer kit with a built-in '''touch''' keyboard, and with built-in speaker/amplifier. 

 
This workshop is for '''''total newbies''''' to '''learn to solder''' and make their own ArduTouch music synthesizer. 

This workshop is for '''''total newbies''''' to '''learn the basics of how to make sound with computer chips.''' 

The ArduTouch comes pre-programmed with a way cool synthesizer. And I will show you how to re-program it with other way cool (and totally different) synthesizers, and how to make your own synthesizers. 

'''When''': 
   Day 1 (3-April, Friday): 4:15pm - 6:45pm


== Full Description: ==
'''Learn to solder''' by making a way-cool, powerful music synthesizer, and 
'''learn how to make cool music, sound, (and noise!) with computer chips''' 
(The fancy word for making sound with a computer chip is ''Digital Signal Processing'' or ''DSP''). 
 
'''[https://cornfieldelectronics.com/cfe/projects.php#ardutouch ArduTouch]''' is an open hardware '''Ardu'''ino-compatible music synthesizer kit with a built-in '''Touch''' Keyboard, and with built-in speaker/amplifier. It is a really nice performing musical instrument. 
 
This workshop is for '''total newbies''' to learn to solder. 
This workshop is for '''total newbies''' to make their own ArduTouch music synthesizer and learn to make music, sound (and noise!) with computer chips. Attendees take their completed synthesiser home at the end of the workshop. 
 
The ArduTouch comes pre-programmed with a way cool synthesizer. And I will show you how to re-program it with other way cool (and totally different) synthesizers, as well as how to make your own synthesizers. 
 
For ages 10 - 100. 
 
Taught by [http://en.wikipedia.org/wiki/Mitch_Altman Mitch Altman]. 
 
'''''Optional''': Bring your laptop if you want to go home with the free Arduino software installed on it. Arduino software runs on Windows, MacOS and Linux.''

'''Materials costs''' 
The workshop is free, but if you would like to partake in the hands-on aspects of the workshop, Mitch will have ArduTouch kits for '''€35'''. 
''Optional'': USB-Serial Cable for re-programming ArduTouch (and many other projects): 5 €.'''

== Workshop Itinerary ==
* Intro to music synthesis

* Basics of making sound with computer chips (Digital Signal Processing)

* Basics of using an Arduino

* Learn to solder. Don't let this scare you! I've taught tens of thousands of people to solder, most of whom have never made anything before in their lives. It is actually a very easy skill to learn. It is also very useful.

* How to re-program your ArduTouch music synthesizer to make lots of cool music, sounds, (and noise!)

== Summary ==
     '''What''': Make an [https://cornfieldelectronics.com/cfe/projects.php#ardutouch ArduTouch music synthesizer] 
     '''When''': 4:15pm to 6:45pm, Day 1 (Friday, 3-April) 

     '''Where''': Solder Enrichment Center 
     '''Who''': Anyone and everyone can have fun making the ArduTouch music synthesizer Ages 10 to 100 
     '''Max #''': 30 participants -- '''''This workshop will fill up, so please do arrive early!''''' 
     '''Cost''': €35 for materials -- (€40 if you also want a USB-Serial cable for re-programming the ArduTouch) 

     '''Instructor''': [https://en.wikipedia.org/wiki/Mitch_Altman Mitch Altman]

     '''website:''' [https://cornfieldelectronics.com/cfe/projects.php#ardutouch ArduTouch music synthesizer kit] 

'''Buy a kit to guarantee a seat, or come by early! (And please do arrive early, regardless!)''' 
 
'''''Optional''': Bring your laptop if you want to go home with the free Arduino software installed on it. Arduino software runs on Windows, MacOS and Linux.''

== Links: ==
[https://cornfieldelectronics.com/cfe/projects.php#ardutouch ArduTouch music synthesizer kit] 
[http://www.arduino.cc/ Ardiuno website] 
[https://github.com/maltman23/ArduTouch ArduTouch Github page]

==Contact==
'''Mitch Altman''': <mitch AT CornfieldElectronics DOT com> 
'''DECT''': 2676 (CORN)

Ich Kann Loeten

2026-03-31T17:16:30Z

Maltman23: /* Lerne Löten - Workshop für absolute Anfänger*innen! */

= Lerne Löten - Workshop für absolute Anfänger*innen! =
[[File:solderbadge_White_and_Blinky_ON_v2.jpg|center|500px|"I Can Solder" Badge kit]] 

Dieser Workshop findet statt: 
   Easterhegg 23, Day 2: Samstag, 4.April, 13:15 - 14:15 

'''HINWEIS: Keine Anmeldung notwendig -- Bitte komm rechtzeitig, um dir einen Platz im Solder Enrichment Center zu sichern..''' 

== Abstract ==
'''''Jede*r'' kann löten lernen! 
Es ist nutlich und macht Spaβ :)''' 
Dieser Workshop ist für Menschen '''aller Altersstufen''' (und jede Person jeden Alters). 
 
Löte eine coole blinkende Brosche, die du anstecken und tragen kannst. 

== Unterrichter ==
[http://en.wikipedia.org/wiki/Mitch_Altman Mitch Altman].
 

== Ausführliche Beschreibung ==

[[File:Learn_to_Solder_GPN21.jpg|right|500px|Learn To Solder workshop at GPN21]] 
 
Löte eine coole blinkende Brosche, die du anstecken und tragen kannst.

Der '''[https://cornfieldelectronics.com/cfe/projects.php#solderbadge "I Can Solder!" Brosche-Bausatz]''' handelt sich um einen sehr einfachen [https://github.com/maltman23/I-Can-Solder--Badge-kit-V2 Open-Hardware] -Bausatz, mit dem jeder das Löten erlernen kann.
 
''Dieser Workshop beitet an'' '''total newbies''' ''die das Löten lernen möchten. Aller Altersstufen.''

== Workshop-Ablaufplan ==
* Überblick über die Elektronik
* Wie man lötet - für ein Leben voller wunderbarer Lötarbeiten
* Schritt-für-Schritt-Anleitung zum Löten des "I Can Solder!" Badge kit
* Überall blinken

== Materialkosten ==
Der Workshop ist kostenlos, 
aber falls du an den praktischen Übungen teilnehmen möchtest, stellt Mitch Materialien für '''10 €''' zur Verfügung. 

== Anmeldung – NICHT erforderlich ==
'''Für diesen Workshop ist keine vorherige Anmeldung erforderlich – kommst du einfach etwas früher, um dich einen Platz zu sichern.''': 

== Zusammenfassung ==
     '''Was''': Ein [https://cornfieldelectronics.com/cfe/projects.php#solderbadge "I Can Solder" Badge kit] bauen 
     '''Wann''': 13:15 - 14:15 Day 2 (Samstag, 4.April) 

     '''Wo''': Solder Enrichment Center 
     '''Wer''': Jeder kann das Löten lernen – aller Altersstufen 
     '''Max #''': 25 Teilnehmer -- '''''Dieser Workshop wird schnell ausgebucht sein, kommst du also bitte rechtzeitig!''''' 
     '''Kosten''': 10 € Materialkosten 

     '''Unterichter''': [https://en.wikipedia.org/wiki/Mitch_Altman Mitch Altman]

     '''Website:''' [https://cornfieldelectronics.com/cfe/projects.php#solderbadge "I Can Solder" Badge kit] 

'''Bitte kaufe ein Ticket, um dir einen Platz zu sichern, oder komm frühzeitig vorbei! (Und bitte komm auf jeden Fall frühzeitig!)''' 

== Links: ==
[https://cornfieldelectronics.com/cfe/projects.php#solderbadge "I Can Solder" Badge kit] 
[https://github.com/maltman23/I-Can-Solder--Badge-kit-V2 "I Can Solder" Badge kit Github page]

==Contact==
'''Mitch Altman''': <mitch AT CornfieldElectronics DOT com> 
'''DECT''': 2676 (CORN)

Ich Kann Loeten

2026-03-31T13:00:51Z

Maltman23: Created page with "= Lerne Löten - Workshop für absolute Anfänger*innen! = "I Can Solder" Badge kit Dieser Workshop findet statt:    Day 2: Samstag, 4.April, 13:15 - 14:15 '''HINWEIS: Keine Anmeldung notwendig -- Bitte komm rechtzeitig, um dir einen Platz im Solder Enrichment Center zu sichern..''' == Abstract == '''''Jede*r'' kann löten lernen! Es ist nutlich..."

= Lerne Löten - Workshop für absolute Anfänger*innen! =
[[File:solderbadge_White_and_Blinky_ON_v2.jpg|center|500px|"I Can Solder" Badge kit]] 

Dieser Workshop findet statt: 
   Day 2: Samstag, 4.April, 13:15 - 14:15 

'''HINWEIS: Keine Anmeldung notwendig -- Bitte komm rechtzeitig, um dir einen Platz im Solder Enrichment Center zu sichern..''' 

== Abstract ==
'''''Jede*r'' kann löten lernen! 
Es ist nutlich und macht Spaβ :)''' 
Dieser Workshop ist für Menschen '''aller Altersstufen''' (und jede Person jeden Alters). 
 
Löte eine coole blinkende Brosche, die du anstecken und tragen kannst. 

== Unterrichter ==
[http://en.wikipedia.org/wiki/Mitch_Altman Mitch Altman].
 

== Ausführliche Beschreibung ==

[[File:Learn_to_Solder_GPN21.jpg|right|500px|Learn To Solder workshop at GPN21]] 
 
Löte eine coole blinkende Brosche, die du anstecken und tragen kannst.

Der '''[https://cornfieldelectronics.com/cfe/projects.php#solderbadge "I Can Solder!" Brosche-Bausatz]''' handelt sich um einen sehr einfachen [https://github.com/maltman23/I-Can-Solder--Badge-kit-V2 Open-Hardware] -Bausatz, mit dem jeder das Löten erlernen kann.
 
''Dieser Workshop beitet an'' '''total newbies''' ''die das Löten lernen möchten. Aller Altersstufen.''

== Workshop-Ablaufplan ==
* Überblick über die Elektronik
* Wie man lötet - für ein Leben voller wunderbarer Lötarbeiten
* Schritt-für-Schritt-Anleitung zum Löten des "I Can Solder!" Badge kit
* Überall blinken

== Materialkosten ==
Der Workshop ist kostenlos, aber falls du an den praktischen Übungen teilnehmen möchtest, stellt Mitch Materialien für '''10 €''' zur Verfügung. 

== Anmeldung – NICHT erforderlich ==
'''Für diesen Workshop ist keine vorherige Anmeldung erforderlich – kommst du einfach etwas früher, um dich einen Platz zu sichern.''': 

== Zusammenfassung ==
     '''Was''': Ein [https://cornfieldelectronics.com/cfe/projects.php#solderbadge "I Can Solder" Badge kit] bauen 
     '''Wann''': 13:15 - 14:15 Day 2 (Samstag, 4.April) 

     '''Wo''': Solder Enrichment Center 
     '''Wer''': Jeder kann das Löten lernen – aller Altersstufen 
     '''Max #''': 25 Teilnehmer -- '''''Dieser Workshop wird schnell ausgebucht sein, kommst du also bitte rechtzeitig!''''' 
     '''Kosten''': 10 € Materialkosten 

     '''Unterichter''': [https://en.wikipedia.org/wiki/Mitch_Altman Mitch Altman]

     '''Website:''' [https://cornfieldelectronics.com/cfe/projects.php#solderbadge "I Can Solder" Badge kit] 

'''Buy a kit to guarantee a seat, or come by early! (And please do arrive early, regardless!)''' 

== Links: ==
[https://cornfieldelectronics.com/cfe/projects.php#solderbadge "I Can Solder" Badge kit] 
[https://github.com/maltman23/I-Can-Solder--Badge-kit-V2 "I Can Solder" Badge kit Github page]

==Contact==
'''Mitch Altman''': <mitch AT CornfieldElectronics DOT com> 
'''DECT''': 2676 (CORN)

== Map ==
[[File:HHA_map_39C3.jpg|600px|left|Location of Hardware Hacking Area]]

File:HHA map 39C3.jpg

2025-12-27T07:52:33Z

Maltman23: Maltman23 uploaded a new version of File:HHA map 39C3.jpg

== Summary ==
map of Hardware Hacking Area in Halle 3 at CCH for 39C3

Synth meetup

2025-12-13T12:37:53Z

Maltman23: Created page with "= Synth Meetup = 450px '''This Meetup will happen:'''    Day 3: Monday       29-December-2025       10:30pm - 12:30pm       at the          Hardware Hacking Area          (see map, below) '''Cost:'''  ..."

= Synth Meetup =
[[File:SynthCollage.jpg|right|450px]] 

'''This Meetup will happen:''' 
   Day 3: Monday 
      29-December-2025 
      10:30pm - 12:30pm 
      at the 
         Hardware Hacking Area 
         (see map, below) 
 
'''Cost:''' 
     none 
 
 
'''NOTE: You do NOT need to register to go to this Meetup -- please just come by the Hardware Hacking Area!''' 
 
 
 
 
 
== Abstract ==
Get together and geek out over music synthesizers, music synthesis, making sound, and creating music. Hardware, software - anything goes! All are welcome to come and talk synths, play synths, share projects, learn, and share. Some attendees have made their own synths at workshops at 39C3 -- please bring them! Please feel free to bring any synth or sound-making device. Everyone welcome - no need to bring anything but your interest in music, sound, and noise! 
 
Oranized by: Mitch Altman 
 

== Registration -- NOT required ==
'''You do not need to register in advance to go to this Meetup -- just come by!''': 

== Map ==
[[File:HHA_map_39C3.jpg|600px|left|Location of Hardware Hacking Area]]

File:SynthCollage.jpg

2025-12-13T12:31:55Z

Maltman23: collage photos by Mitch Altman

== Summary ==
collage photos by Mitch Altman

ArduinoForTotalNewbies

2025-12-13T12:15:52Z

Maltman23:

= Arduino For Total Newbies workshop =

== ''Learn Arduino using TV-B-Gone as an example project'' ==
 
This workshop will be given: 
   Day 2: Sunday, 28-December, 1:30pm - 5:00pm 

   at the '''Hardware Hacking Area''' (see map below) 
 
'''NOTE: You do NOT need to register to take this workshop -- please show up early to ensure a seat at the Hardware Hacking Area.''' 
 

== Abstract: ==

[[File:A4TN35C3.jpg|thumb|right|Arduino For Total Newbies workshop at 35C3]]
[[File:A4TN.jpg|thumb|right|Arduino For Total Newbies workshop 29-March-2015 at Noisebridge]]

''Learn Arduino using TV-B-Gone as an example project'' 
 
You've probably heard lots about [http://arduino.cc/ Arduino]. But if you don't know what it is, or how you can use it to do all sorts of cool things, then this fun and easy workshop is for you. As an example project, we'll be creating a [http://www.tvbgone.com TV-B-Gone] remote control out of an [http://arduino.cc/ Arduino] you can take home with you.
 
'''When''': 
   Day 2 (December 28th, Sunday):1:30pm - 5:00pm


      at the '''Hardware Hacking Area''' (see map below) 

'''More info''' on the Arduino For Total Newbies workshop page: 
[http://cornfieldelectronics.com/cfe/projects/tvbg_arduino/tvbg_arduino_workshop.php Arduino For Total Newbies workshop page]

== Full Description: ==
'''[http://arduino.cc/ Arduino]''' is an amazingly powerful tool that is very simple to learn to use. It was designed so that artists and non-geeks can start from nothing, and make something cool happen in less than 90 minutes. Yet, it is powerful enough so that experienced expert geeks can use it for their projects as well.

This workshop is easy enough for '''''total newbies''''' to '''learn all you need to know to get going on an Arduino.'''

Participants will make their own Arduino clone, and set it up on solderless breadboards to make their own [http://www.tvbgone.com TV-B-Gone] remote control to turn off TVs in public places -- a fun way to learn Arduino (and electronics) basics. Bring your laptop, if you can.

Taught by [http://en.wikipedia.org/wiki/Mitch_Altman Mitch Altman].

''Big thanks to Ken Shirriff, who came up with the original [http://www.arcfn.com/2009/12/tv-b-gone-for-arduino.html TV-B-Gone for Arduino].''

'''''Optional''''': Bring your laptop if you want to go home with the free Arduino software installed on it. 
Arduino software runs on Windows, MacOS and Linux._ 

'''Materials costs''': 
The workshop is free, but if you would like to partake in the hands-on aspects of the workshop, Mitch will have materials for '''€40''' (useful for making many different cool projects).

'''Workshop page:''' 
[http://cornfieldelectronics.com/cfe/projects/tvbg_arduino/tvbg_arduino_workshop.php Arduino For Total Newbies workshop page]

== Workshop Itinerary ==
* Intro to Arduino

* Very short lesson to learn everything you need to know about electronics!

* Then we will learn to solder. Don't let this scare you! I've taught tens of thousands of people to solder, most of whom have never made anything before in their lives. It is actually a very easy skill to learn. It is also very useful.

* Then we will each make our own Arduino clone from a kit made by Samurai Circuits: [https://cornfieldelectronics.com/cfe/u_do_it_duino_complete.php U-Do-It-Duino].

* Now that we each have our own Arduino board, we will set up the free and open-source Arduino software on our laptops (if you bring one) -- Windows, Linux, and MacOS are all fine!

* And then its time to make something and learn how easy it is to use Arduino! I'll (very easily!) show you how to read schematic diagrams, and you'll put together your own TV-B-Gone remote control using your Arduino clone board. We will use a solderless breadboard. These are really useful, and provide a fast, and very easy way to put circuits together without needing to solder.

* Target practice is available all over the world after the workshop.

== Summary ==
     '''What''': [http://arduino.cc/ Arduino] workshop for total newbies, using [http://www.tvbgone.com TV-B-Gone] remote controls as an intro 
     '''When''': 1:30pm-5:00pm, Day 2 (28-December, Sunday) 

     '''Where''': Hardware Hacking Area (see map, below) 
     '''Who''': Anyone and everyone can have fun learning Arduino. Ages 10 to 100 
     '''Max #''': 50 participants -- '''''This workshop will fill up, so please do arrive early!''''' 
     '''Cost''': €40 for materials -- includes everything you need to make your [http://www.arcfn.com/2009/12/tv-b-gone-for-arduino.html Arduino TV-B-Gone]! 
          And you get to bring home your [http://www.arcfn.com/2009/12/tv-b-gone-for-arduino.html Arduino TV-B-Gone] and all materials to play with Arduino at home (or wherever you want). 

     '''Instructor''': [https://en.wikipedia.org/wiki/Mitch_Altman Mitch Altman]

     '''website:''' [http://cornfieldelectronics.com/cfe/projects/tvbg_arduino/tvbg_arduino_workshop.php Arduino For Total Newbies workshop page] 

'''Buy a kit to guarantee a seat, or come by early! (And please do arrive early, regardless!)''' 
 
'''''Optional''': Bring your laptop if you want to go home with the free Arduino software installed on it. Arduino software runs on Windows, MacOS and Linux.''

== Links: ==
'''[http://cornfieldelectronics.com/cfe/projects/tvbg_arduino/tvbg_arduino_workshop.php Arduino For Total Newbies webpage] '''
[http://www.tvbgone.com TV-B-Gone website] 
[http://www.arduino.cc/ Ardiuno website] 
[http://www.arcfn.com/2009/12/tv-b-gone-for-arduino.html Ken Shirriff's TV-B-Gone Arduino project page] 
[https://cornfieldelectronics.com/cfe/u_do_it_duino_complete.php U-Do-It-Duino] 


==Contact==
'''Mitch Altman''': <mitch AT CornfieldElectronics DOT com> 
'''DECT''': 2676 (CORN)

== Map ==
[[File:HHA_map_39C3.jpg|600px|left|Location of Hardware Hacking Area]]

I Can Solder

2025-12-13T12:13:33Z

Maltman23:

= Learn to Solder =
[[File:solderbadge_White_and_Blinky_ON_v2.jpg|center|500px|"I Can Solder" Badge kit]] 

This workshop will be given: 
   Day 3: Monday, 29-December, 6:30pm - 7:30pm 

'''NOTE: You do NOT need to register to take this workshop -- please show up early to ensure a seat at the Hardware Hacking Area.''' 

== Abstract ==
'''''Anyone'' can learn to solder!''' 
It is useful and fun. 
This workshop is for '''kids of all ages''' (and anyone of any age). 
 
We will learn this wonderful skill by making a blinky-badge kit, so you can wear blinky-lights wherever you go. 

== Presenter ==
[http://en.wikipedia.org/wiki/Mitch_Altman Mitch Altman].
 

== Full Description ==

[[File:Learn_to_Solder_GPN21.jpg|right|500px|Learn To Solder workshop at GPN21]] 
 
Learn to solder by making a cool badge that you can wear, and have blinky-lights wherever you go.

The '''[https://cornfieldelectronics.com/cfe/projects.php#solderbadge "I Can Solder!" Badge kit]''' is a very simple [https://github.com/maltman23/I-Can-Solder--Badge-kit-V2 open hardware] kit that anyone can use for learning to solder.
 
''This workshop is for'' '''total newbies''' ''to learn to solder. All ages.''

== Workshop Itinerary ==
* Brief overview of electronics
* The background of soldering, so you will solder well for the rest of your life
* Step by step instructions for soldering your "I Can Solder!" Badge kit
* Wear Blinky-Lights wherever you go

== Materials cost ==
The workshop is free, but if you would like to partake in the hands-on aspects of the workshop, Mitch will have materials for '''€10'''. 

== Registration -- NOT required ==
'''You do not need to register in advance to take this workshop -- just show up early to ensure a seat.''': 

== Summary ==
     '''What''': Make an [https://cornfieldelectronics.com/cfe/projects.php#solderbadge "I Can Solder" Badge kit] 
     '''When''': 6:30pm to 7:30pm Day 3 (Monday, December 29th) 

     '''Where''': Hardware Hacking Area (see Map, below) 
     '''Who''': Anyone and everyone can learn to solder -- all ages 
     '''Max #''': 50 participants -- '''''This workshop will fill up, so please do arrive early!''''' 
     '''Cost''': €10 for materials 

     '''Instructor''': [https://en.wikipedia.org/wiki/Mitch_Altman Mitch Altman]

     '''website:''' [https://cornfieldelectronics.com/cfe/projects.php#solderbadge "I Can Solder" Badge kit] 

'''Buy a kit to guarantee a seat, or come by early! (And please do arrive early, regardless!)''' 

== Links: ==
[https://cornfieldelectronics.com/cfe/projects.php#solderbadge "I Can Solder" Badge kit] 
[https://github.com/maltman23/I-Can-Solder--Badge-kit-V2 "I Can Solder" Badge kit Github page]

==Contact==
'''Mitch Altman''': <mitch AT CornfieldElectronics DOT com> 
'''DECT''': 2676 (CORN)

== Map ==
[[File:HHA_map_39C3.jpg|600px|left|Location of Hardware Hacking Area]]

LED Strips Everywhere

2025-12-13T12:11:27Z

Maltman23: update for 39C3

= LED Strips Everywhere for Everyone! workshop =

This workshop will be given: 
   Day 2: Sunday, 28-December, 23:00 - 24:30    LATE NIGHT! 

'''NOTE: You do NOT need to register to take this workshop -- please show up early to ensure a seat at the Hardware Hacking Area Village.''' 
 

== Abstract ==
''Learn how to program LED strips. It's super easy and fun to make your life trippy and beautiful. For total beginners. ''
[[File:LEDstrip.jpg|center|500px|Making an LED strip do its thing]]Learn how to light up LED strips with a cheap Arduino, and make your life trippy and beautiful!
 
'''For total beginners''' -- no knowledge needed at all. 

== Presenter ==
[http://en.wikipedia.org/wiki/Mitch_Altman Mitch Altman].
 

== Full Description ==
[[File:35C3_LEDstrip_tunnel.jpg|center|500px|LED strip tunnel at 35C3, Leipzig, Germany]] 
LED strips have become really inexpensive. And many people have created easy methods of controlling the color and brightness of individual LEDs in LED strips. This workshop will show you one easy and fun way to control LED strips, and to make them do what you want. I'll show you everything you need to know to use existing Arduino programs -- and how to hack Arduino programs -- to control the colors in your world with LED strips.

== Workshop Itinerary ==
* Intro to Red-Green-Blue (RGB) LEDs 
* Brief intro to Arduino 
* How to use an Arduino to control an LED strip 
* Some demos of programs you can download 

== Materials cost ==
The workshop is free, but if you would like to partake in the hands-on aspects of the workshop, Mitch will have materials for '''€20'''. 

== Registration -- NOT required ==
'''You do not need to register in advance to take this workshop -- just show up early to ensure a seat.''': 

== Software ==
''Optional'': Bring your laptop if you want to go home with the free Arduino software installed on it. 
Arduino software runs on Windows, MacOS and Linux.: 
[https://www.arduino.cc/en/Main/Software Arduino software]

== Summary ==
     '''What''': Learn to program LED strips and make your life trippy 
     '''When''': 23:00 to 24:30, Day 2 (Sunday, December 28th) -- LATE NIGHT! 

     '''Where''': Hardware Hacking Area (see Map, below) 
     '''Who''': Anyone and everyone can learn to program LED strips. Ages 10 to 100 
     '''Max #''': 50 participants -- '''''This workshop will fill up, so please do arrive early!''''' 
     '''Cost''': €20 for materials 

     '''Instructor''': [https://en.wikipedia.org/wiki/Mitch_Altman Mitch Altman]

     '''website:''' [https://cornfieldelectronics.com/cfe/projects.php#ledstrips LED Strips Everywhere for Everyone!] 

'''Buy a kit to guarantee a seat, or come by early! (And please do arrive early, regardless!)''' 
 
'''''Optional''': Bring your laptop if you want to go home with the free Arduino software installed on it. Arduino software runs on Windows, MacOS and Linux.''

== Links ==
[https://cornfieldelectronics.com/cfe/projects.php#ledstrips More info about the '''LED Strips Everywhere for Everyone!''' workshop] 
[http://www.arduino.cc/ Ardiuno website] 

== Map ==
[[File:HHA_map_39C3.jpg|600px|left|Location of Hardware Hacking Area]]

I Can Solder

2025-12-13T12:03:45Z

Maltman23: update for 39C3

= Learn to Solder =
[[File:solderbadge_White_and_Blinky_ON_v2.jpg|center|500px|"I Can Solder" Badge kit]] 

This workshop will be given: 
   Day 3: Monday, 29-December, 6:30pm - 7:30pm 

'''NOTE: You do NOT need to register to take this workshop -- please show up early to ensure a seat at the Hardware Hacking Area Village.''' 

== Abstract ==
'''''Anyone'' can learn to solder!''' 
It is useful and fun. 
This workshop is for '''kids of all ages''' (and anyone of any age). 
 
We will learn this wonderful skill by making a blinky-badge kit, so you can wear blinky-lights wherever you go. 

== Presenter ==
[http://en.wikipedia.org/wiki/Mitch_Altman Mitch Altman].
 

== Full Description ==

[[File:Learn_to_Solder_GPN21.jpg|right|500px|Learn To Solder workshop at GPN21]] 
 
Learn to solder by making a cool badge that you can wear, and have blinky-lights wherever you go.

The '''[https://cornfieldelectronics.com/cfe/projects.php#solderbadge "I Can Solder!" Badge kit]''' is a very simple [https://github.com/maltman23/I-Can-Solder--Badge-kit-V2 open hardware] kit that anyone can use for learning to solder.
 
''This workshop is for'' '''total newbies''' ''to learn to solder. All ages.''

== Workshop Itinerary ==
* Brief overview of electronics
* The background of soldering, so you will solder well for the rest of your life
* Step by step instructions for soldering your "I Can Solder!" Badge kit
* Wear Blinky-Lights wherever you go

== Materials cost ==
The workshop is free, but if you would like to partake in the hands-on aspects of the workshop, Mitch will have materials for '''€10'''. 

== Registration -- NOT required ==
'''You do not need to register in advance to take this workshop -- just show up early to ensure a seat.''': 

== Summary ==
     '''What''': Make an [https://cornfieldelectronics.com/cfe/projects.php#solderbadge "I Can Solder" Badge kit] 
     '''When''': 6:30pm to 7:30pm Day 3 (Monday, December 29th) 

     '''Where''': Hardware Hacking Area (see Map, below) 
     '''Who''': Anyone and everyone can learn to solder -- all ages 
     '''Max #''': 50 participants -- '''''This workshop will fill up, so please do arrive early!''''' 
     '''Cost''': €10 for materials 

     '''Instructor''': [https://en.wikipedia.org/wiki/Mitch_Altman Mitch Altman]

     '''website:''' [https://cornfieldelectronics.com/cfe/projects.php#solderbadge "I Can Solder" Badge kit] 

'''Buy a kit to guarantee a seat, or come by early! (And please do arrive early, regardless!)''' 

== Links: ==
[https://cornfieldelectronics.com/cfe/projects.php#solderbadge "I Can Solder" Badge kit] 
[https://github.com/maltman23/I-Can-Solder--Badge-kit-V2 "I Can Solder" Badge kit Github page]

==Contact==
'''Mitch Altman''': <mitch AT CornfieldElectronics DOT com> 
'''DECT''': 2676 (CORN)

== Map ==
[[File:HHA_map_39C3.jpg|600px|left|Location of Hardware Hacking Area Village]]

Brain Machine

2025-12-13T11:20:51Z

Maltman23: /* Make Your Own Brain Machine workshop */

= '''Make Your Own Brain Machine workshop''' =
[[Image:BrainMachineKids.jpg|center|500px|Fun using Brain Machines]] 
==Dive into the fascinating world of neurotechnology and construct your very own Brain Machine under expert guidance! ==
<div style="text-align:center">
== '''''Meditate! Hallucinate! Trip out!''''' ==
</div>
 
This workshop will be given: 
   Day 4: Tuesday, 30-December, 1:00pm - 3:00pm 
 
'''NOTE: You do NOT need to register to take this workshop -- please show up early to ensure a seat at the Hardware Hacking Area.''' 
 

== Abstract: ==
[[File:BrainMachineWorkshopFabLabNK.jpg|right|500px|Brain Machine workshop at FabLabNK]] 
 
'''What is a''' 
'''[https://cornfieldelectronics.com/cfe/projects.php#brainmachine Brain Machine]?''' 
It's a fascinating device that generates light and sound pulses at brainwave frequencies. These can help achieve various states of consciousness, such as meditation or improved sleep. 
 
In this workshop for '''total beginners''' we will all make a '''[https://cornfieldelectronics.com/cfe/projects.php#brainmachine Brain Machine]'''
that is preprogrammed with a really nice meditation sequence. As well as a device that can help you relax and meditate, a nice bonus is that everyone hallucinates beautiful colors and patterns along the way. 

The Brain Machine is totally [https://github.com/maltman23/Brain_Machine_kit open hardware], and created to be hackable, so you can re-program it with any computer, with software that is free to download and use. 

This workshop is for ''**total beginners**'' to learn to solder. 

'''''IMPORTANT NOTE:''''' '''The Brain Machine uses blinking lights, and is not recommended for people who are photosensitive.''' 

'''When''': 
   Day 4 (December 30th, Tuesday): 1:00pm - 3:00pm

== Full Description: ==
'''Learn to solder''' by making a way-cool, Sound & Light Machine, that will help you meditate, and hallucinate. It can also be re-programmed to help with sleep, and reduce brain fog. 
 
The '''[https://cornfieldelectronics.com/cfe/projects.php#brainmachine Brain Machine]''' is open hardware, and created to be hackable. 
 
This workshop is for '''total beginners''' to learn to solder. 
 
For ages 10 - 100. 
 
Taught by [http://en.wikipedia.org/wiki/Mitch_Altman Mitch Altman]. 
 
'''''Optional''': Bring your laptop if you want to go home with the free Arduino software installed on it. Arduino software runs on Windows, MacOS and Linux.''

'''Materials costs''' 
The workshop is free, but if you would like to partake in the hands-on aspects of the workshop, Mitch will have ArduTouch kits for '''€25'''. 

'''''IMPORTANT NOTE:''''' '''The Brain Machine uses blinking lights, and is not recommended for people who are photosensitive.''' 

== Workshop Itinerary ==
* Intro to Sound & Light Machines

* Learn to solder. Don't let this scare you! I've taught tens of thousands of people to solder, most of whom have never made anything before in their lives. It is actually a very easy skill to learn. It is also very useful.

* How to re-program your Brain Machine for creating other brainwave sequences

== Summary ==
     '''What''': Make an [https://cornfieldelectronics.com/cfe/projects.php#brainmachine Brain Machine] 
     '''When''': 1:00pm to 3:00pm, Day 4 (Tuesday, December 30th) 

     '''Where''': Hardware Hacking Area (see Map, below) 
     '''Who''': Anyone and everyone can have fun making the Brain Machine Ages 10 to 100 
     '''Max #''': 25 participants -- '''''This workshop will fill up, so please do arrive early!''''' 
     '''Cost''': €25 for materials 

     '''Instructor''': [https://en.wikipedia.org/wiki/Mitch_Altman Mitch Altman]

     '''website:''' [https://cornfieldelectronics.com/cfe/projects.php#brainmachine Brain Machine kit] 

'''Buy a kit to guarantee a seat, or come by early! (And please do arrive early, regardless!)''' 
 
'''''Optional''': Bring your laptop if you want to go home with the free Arduino software installed on it. Arduino software runs on Windows, MacOS and Linux.''

== Links: ==
[https://cornfieldelectronics.com/cfe/projects.php#brainmachine Brain Machine kit] 
[http://www.arduino.cc/ Ardiuno website] 
[https://github.com/maltman23/Brain_Machine_kit Brain Machine Github page]

==Contact==
'''Mitch Altman''': <mitch AT CornfieldElectronics DOT com> 
'''DECT''': 2676 (CORN)

== Map ==
[[File:HHA_map_39C3.jpg|600px|left|Location of Hardware Hacking Area]]

Brain Machine

2025-12-13T11:19:08Z

Maltman23: /* Make Your Own Brain Machine workshop */

= '''Make Your Own Brain Machine workshop''' =
[[Image:BrainMachineKids.jpg|center|500px|Fun using Brain Machines]] 
==Dive into the fascinating world of neurotechnology and construct your very own Brain Machine under expert guidance! ==
<div style="text-align:center">
== ''Meditate! Hallucinate! Trip out!'' ==
</div>
 
This workshop will be given: 
   Day 4: Tuesday, 30-December, 1:00pm - 3:00pm 
 
'''NOTE: You do NOT need to register to take this workshop -- please show up early to ensure a seat at the Hardware Hacking Area.''' 
 

== Abstract: ==
[[File:BrainMachineWorkshopFabLabNK.jpg|right|500px|Brain Machine workshop at FabLabNK]] 
 
'''What is a''' 
'''[https://cornfieldelectronics.com/cfe/projects.php#brainmachine Brain Machine]?''' 
It's a fascinating device that generates light and sound pulses at brainwave frequencies. These can help achieve various states of consciousness, such as meditation or improved sleep. 
 
In this workshop for '''total beginners''' we will all make a '''[https://cornfieldelectronics.com/cfe/projects.php#brainmachine Brain Machine]'''
that is preprogrammed with a really nice meditation sequence. As well as a device that can help you relax and meditate, a nice bonus is that everyone hallucinates beautiful colors and patterns along the way. 

The Brain Machine is totally [https://github.com/maltman23/Brain_Machine_kit open hardware], and created to be hackable, so you can re-program it with any computer, with software that is free to download and use. 

This workshop is for ''**total beginners**'' to learn to solder. 

'''''IMPORTANT NOTE:''''' '''The Brain Machine uses blinking lights, and is not recommended for people who are photosensitive.''' 

'''When''': 
   Day 4 (December 30th, Tuesday): 1:00pm - 3:00pm

== Full Description: ==
'''Learn to solder''' by making a way-cool, Sound & Light Machine, that will help you meditate, and hallucinate. It can also be re-programmed to help with sleep, and reduce brain fog. 
 
The '''[https://cornfieldelectronics.com/cfe/projects.php#brainmachine Brain Machine]''' is open hardware, and created to be hackable. 
 
This workshop is for '''total beginners''' to learn to solder. 
 
For ages 10 - 100. 
 
Taught by [http://en.wikipedia.org/wiki/Mitch_Altman Mitch Altman]. 
 
'''''Optional''': Bring your laptop if you want to go home with the free Arduino software installed on it. Arduino software runs on Windows, MacOS and Linux.''

'''Materials costs''' 
The workshop is free, but if you would like to partake in the hands-on aspects of the workshop, Mitch will have ArduTouch kits for '''€25'''. 

'''''IMPORTANT NOTE:''''' '''The Brain Machine uses blinking lights, and is not recommended for people who are photosensitive.''' 

== Workshop Itinerary ==
* Intro to Sound & Light Machines

* Learn to solder. Don't let this scare you! I've taught tens of thousands of people to solder, most of whom have never made anything before in their lives. It is actually a very easy skill to learn. It is also very useful.

* How to re-program your Brain Machine for creating other brainwave sequences

== Summary ==
     '''What''': Make an [https://cornfieldelectronics.com/cfe/projects.php#brainmachine Brain Machine] 
     '''When''': 1:00pm to 3:00pm, Day 4 (Tuesday, December 30th) 

     '''Where''': Hardware Hacking Area (see Map, below) 
     '''Who''': Anyone and everyone can have fun making the Brain Machine Ages 10 to 100 
     '''Max #''': 25 participants -- '''''This workshop will fill up, so please do arrive early!''''' 
     '''Cost''': €25 for materials 

     '''Instructor''': [https://en.wikipedia.org/wiki/Mitch_Altman Mitch Altman]

     '''website:''' [https://cornfieldelectronics.com/cfe/projects.php#brainmachine Brain Machine kit] 

'''Buy a kit to guarantee a seat, or come by early! (And please do arrive early, regardless!)''' 
 
'''''Optional''': Bring your laptop if you want to go home with the free Arduino software installed on it. Arduino software runs on Windows, MacOS and Linux.''

== Links: ==
[https://cornfieldelectronics.com/cfe/projects.php#brainmachine Brain Machinekit] 
[http://www.arduino.cc/ Ardiuno website] 
[https://github.com/maltman23/Brain_Machine_kit Brain Machine Github page]

==Contact==
'''Mitch Altman''': <mitch AT CornfieldElectronics DOT com> 
'''DECT''': 2676 (CORN)

== Map ==
[[File:HHA_map_39C3.jpg|600px|left|Location of Hardware Hacking Area]]

Brain Machine

2025-12-13T11:14:10Z

Maltman23:

= '''Make Your Own Brain Machine workshop''' =
[[Image:BrainMachineKids.jpg|center|500px|Fun using Brain Machines]] 
==Dive into the fascinating world of neurotechnology and construct your very own Brain Machine under expert guidance! ==
 
This workshop will be given: 
   Day 4: Tuesday, 30-December, 1:00pm - 3:00pm 
 
'''NOTE: You do NOT need to register to take this workshop -- please show up early to ensure a seat at the Hardware Hacking Area.''' 
 

== Abstract: ==
[[File:BrainMachineWorkshopFabLabNK.jpg|right|500px|Brain Machine workshop at FabLabNK]] 
 
'''What is a''' 
'''[https://cornfieldelectronics.com/cfe/projects.php#brainmachine Brain Machine]?''' 
It's a fascinating device that generates light and sound pulses at brainwave frequencies. These can help achieve various states of consciousness, such as meditation or improved sleep. 
 
In this workshop for '''total beginners''' we will all make a '''[https://cornfieldelectronics.com/cfe/projects.php#brainmachine Brain Machine]'''
that is preprogrammed with a really nice meditation sequence. As well as a device that can help you relax and meditate, a nice bonus is that everyone hallucinates beautiful colors and patterns along the way. 

The Brain Machine is totally [https://github.com/maltman23/Brain_Machine_kit open hardware], and created to be hackable, so you can re-program it with any computer, with software that is free to download and use. 

This workshop is for ''**total beginners**'' to learn to solder. 

'''''IMPORTANT NOTE:''''' '''The Brain Machine uses blinking lights, and is not recommended for people who are photosensitive.''' 

'''When''': 
   Day 4 (December 30th, Tuesday): 1:00pm - 3:00pm

== Full Description: ==
'''Learn to solder''' by making a way-cool, Sound & Light Machine, that will help you meditate, and hallucinate. It can also be re-programmed to help with sleep, and reduce brain fog. 
 
The '''[https://cornfieldelectronics.com/cfe/projects.php#brainmachine Brain Machine]''' is open hardware, and created to be hackable. 
 
This workshop is for '''total beginners''' to learn to solder. 
 
For ages 10 - 100. 
 
Taught by [http://en.wikipedia.org/wiki/Mitch_Altman Mitch Altman]. 
 
'''''Optional''': Bring your laptop if you want to go home with the free Arduino software installed on it. Arduino software runs on Windows, MacOS and Linux.''

'''Materials costs''' 
The workshop is free, but if you would like to partake in the hands-on aspects of the workshop, Mitch will have ArduTouch kits for '''€25'''. 

'''''IMPORTANT NOTE:''''' '''The Brain Machine uses blinking lights, and is not recommended for people who are photosensitive.''' 

== Workshop Itinerary ==
* Intro to Sound & Light Machines

* Learn to solder. Don't let this scare you! I've taught tens of thousands of people to solder, most of whom have never made anything before in their lives. It is actually a very easy skill to learn. It is also very useful.

* How to re-program your Brain Machine for creating other brainwave sequences

== Summary ==
     '''What''': Make an [https://cornfieldelectronics.com/cfe/projects.php#brainmachine Brain Machine] 
     '''When''': 1:00pm to 3:00pm, Day 4 (Tuesday, December 30th) 

     '''Where''': Hardware Hacking Area (see Map, below) 
     '''Who''': Anyone and everyone can have fun making the Brain Machine Ages 10 to 100 
     '''Max #''': 25 participants -- '''''This workshop will fill up, so please do arrive early!''''' 
     '''Cost''': €25 for materials 

     '''Instructor''': [https://en.wikipedia.org/wiki/Mitch_Altman Mitch Altman]

     '''website:''' [https://cornfieldelectronics.com/cfe/projects.php#brainmachine Brain Machine kit] 

'''Buy a kit to guarantee a seat, or come by early! (And please do arrive early, regardless!)''' 
 
'''''Optional''': Bring your laptop if you want to go home with the free Arduino software installed on it. Arduino software runs on Windows, MacOS and Linux.''

== Links: ==
[https://cornfieldelectronics.com/cfe/projects.php#brainmachine Brain Machinekit] 
[http://www.arduino.cc/ Ardiuno website] 
[https://github.com/maltman23/Brain_Machine_kit Brain Machine Github page]

==Contact==
'''Mitch Altman''': <mitch AT CornfieldElectronics DOT com> 
'''DECT''': 2676 (CORN)

== Map ==
[[File:HHA_map_39C3.jpg|600px|left|Location of Hardware Hacking Area]]

Brain Machine

2025-12-13T11:08:40Z

Maltman23: /* Abstract: */

= '''Make Your Own Brain Machine workshop''' =
[[Image:BrainMachineKids.jpg|center|500px|Fun using Brain Machines]] 
==Dive into the fascinating world of neurotechnology and construct your very own Brain Machine under expert guidance! ==
 
This workshop will be given: 
   Day 4: Tuesday, 30-December, 1:00pm - 3:00pm 
 
'''NOTE: You do NOT need to register to take this workshop -- please show up early to ensure a seat at the Hardware Hacking Area.''' 
 

== Abstract: ==
[[File:BrainMachineWorkshopFabLabNK.jpg|right|500px|Brain Machine workshop at FabLabNK]] 
 
'''What is a''' 
'''[https://cornfieldelectronics.com/cfe/projects.php#brainmachine Brain Machine]?''' 
It's a fascinating device that generates light and sound pulses at brainwave frequencies. These can help achieve various states of consciousness, such as meditation or improved sleep. 
 
In this workshop for '''total beginners''' we will all make a '''[https://cornfieldelectronics.com/cfe/projects.php#brainmachine Brain Machine]'''
that is preprogrammed with a really nice meditation sequence. As well as a device that can help you relax and meditate, a nice bonus is that everyone hallucinates beautiful colors and patterns along the way. 

The Brain Machine is totally [https://github.com/maltman23/Brain_Machine_kit open hardware], and created to be hackable, so you can re-program it with any computer, with software that is free to download and use. 

This workshop is for ''**total beginners**'' to learn to solder. 

'''When''': 
   Day 4 (December 30th, Tuesday): 1:00pm - 3:00pm

== Full Description: ==
'''Learn to solder''' by making a way-cool, Sound & Light Machine, that will help you meditate, and hallucinate. It can also be re-programmed to help with sleep, and reduce brain fog. 
 
The '''[https://cornfieldelectronics.com/cfe/projects.php#brainmachine Brain Machine]''' is open hardware, and created to be hackable. 
 
This workshop is for '''total beginners''' to learn to solder. 
 
For ages 10 - 100. 
 
Taught by [http://en.wikipedia.org/wiki/Mitch_Altman Mitch Altman]. 
 
'''''Optional''': Bring your laptop if you want to go home with the free Arduino software installed on it. Arduino software runs on Windows, MacOS and Linux.''

'''Materials costs''' 
The workshop is free, but if you would like to partake in the hands-on aspects of the workshop, Mitch will have ArduTouch kits for '''€25'''. 

== Workshop Itinerary ==
* Intro to Sound & Light Machines

* Learn to solder. Don't let this scare you! I've taught tens of thousands of people to solder, most of whom have never made anything before in their lives. It is actually a very easy skill to learn. It is also very useful.

* How to re-program your Brain Machine for creating other brainwave sequences

== Summary ==
     '''What''': Make an [https://cornfieldelectronics.com/cfe/projects.php#brainmachine Brain Machine] 
     '''When''': 1:00pm to 3:00pm, Day 4 (Tuesday, December 30th) 

     '''Where''': Hardware Hacking Area (see Map, below) 
     '''Who''': Anyone and everyone can have fun making the Brain Machine Ages 10 to 100 
     '''Max #''': 25 participants -- '''''This workshop will fill up, so please do arrive early!''''' 
     '''Cost''': €25 for materials 

     '''Instructor''': [https://en.wikipedia.org/wiki/Mitch_Altman Mitch Altman]

     '''website:''' [https://cornfieldelectronics.com/cfe/projects.php#brainmachine Brain Machine kit] 

'''Buy a kit to guarantee a seat, or come by early! (And please do arrive early, regardless!)''' 
 
'''''Optional''': Bring your laptop if you want to go home with the free Arduino software installed on it. Arduino software runs on Windows, MacOS and Linux.''

== Links: ==
[https://cornfieldelectronics.com/cfe/projects.php#brainmachine Brain Machinekit] 
[http://www.arduino.cc/ Ardiuno website] 
[https://github.com/maltman23/Brain_Machine_kit Brain Machine Github page]

==Contact==
'''Mitch Altman''': <mitch AT CornfieldElectronics DOT com> 
'''DECT''': 2676 (CORN)

== Map ==
[[File:HHA_map_39C3.jpg|600px|left|Location of Hardware Hacking Area]]

Brain Machine

2025-12-13T11:07:36Z

Maltman23: /* Abstract: */

= '''Make Your Own Brain Machine workshop''' =
[[Image:BrainMachineKids.jpg|center|500px|Fun using Brain Machines]] 
==Dive into the fascinating world of neurotechnology and construct your very own Brain Machine under expert guidance! ==
 
This workshop will be given: 
   Day 4: Tuesday, 30-December, 1:00pm - 3:00pm 
 
'''NOTE: You do NOT need to register to take this workshop -- please show up early to ensure a seat at the Hardware Hacking Area.''' 
 

== Abstract: ==
[[File:BrainMachineWorkshopFabLabNK.jpg|right|500px|Brain Machine workshop at FabLabNK]] 
 
'''What is a [https://cornfieldelectronics.com/cfe/projects.php#brainmachine Brain Machine]?''' It's a fascinating device that generates light and sound pulses at brainwave frequencies. These can help achieve various states of consciousness, such as meditation or improved sleep. 
 
In this workshop for '''total beginners''' we will all make a '''[https://cornfieldelectronics.com/cfe/projects.php#brainmachine Brain Machine]'''
that is preprogrammed with a really nice meditation sequence. As well as a device that can help you relax and meditate, a nice bonus is that everyone hallucinates beautiful colors and patterns along the way. 

The Brain Machine is totally [https://github.com/maltman23/Brain_Machine_kit open hardware], and created to be hackable, so you can re-program it with any computer, with software that is free to download and use. 

This workshop is for ''**total beginners**'' to learn to solder. 

'''When''': 
   Day 4 (December 30th, Tuesday): 1:00pm - 3:00pm

== Full Description: ==
'''Learn to solder''' by making a way-cool, Sound & Light Machine, that will help you meditate, and hallucinate. It can also be re-programmed to help with sleep, and reduce brain fog. 
 
The '''[https://cornfieldelectronics.com/cfe/projects.php#brainmachine Brain Machine]''' is open hardware, and created to be hackable. 
 
This workshop is for '''total beginners''' to learn to solder. 
 
For ages 10 - 100. 
 
Taught by [http://en.wikipedia.org/wiki/Mitch_Altman Mitch Altman]. 
 
'''''Optional''': Bring your laptop if you want to go home with the free Arduino software installed on it. Arduino software runs on Windows, MacOS and Linux.''

'''Materials costs''' 
The workshop is free, but if you would like to partake in the hands-on aspects of the workshop, Mitch will have ArduTouch kits for '''€25'''. 

== Workshop Itinerary ==
* Intro to Sound & Light Machines

* Learn to solder. Don't let this scare you! I've taught tens of thousands of people to solder, most of whom have never made anything before in their lives. It is actually a very easy skill to learn. It is also very useful.

* How to re-program your Brain Machine for creating other brainwave sequences

== Summary ==
     '''What''': Make an [https://cornfieldelectronics.com/cfe/projects.php#brainmachine Brain Machine] 
     '''When''': 1:00pm to 3:00pm, Day 4 (Tuesday, December 30th) 

     '''Where''': Hardware Hacking Area (see Map, below) 
     '''Who''': Anyone and everyone can have fun making the Brain Machine Ages 10 to 100 
     '''Max #''': 25 participants -- '''''This workshop will fill up, so please do arrive early!''''' 
     '''Cost''': €25 for materials 

     '''Instructor''': [https://en.wikipedia.org/wiki/Mitch_Altman Mitch Altman]

     '''website:''' [https://cornfieldelectronics.com/cfe/projects.php#brainmachine Brain Machine kit] 

'''Buy a kit to guarantee a seat, or come by early! (And please do arrive early, regardless!)''' 
 
'''''Optional''': Bring your laptop if you want to go home with the free Arduino software installed on it. Arduino software runs on Windows, MacOS and Linux.''

== Links: ==
[https://cornfieldelectronics.com/cfe/projects.php#brainmachine Brain Machinekit] 
[http://www.arduino.cc/ Ardiuno website] 
[https://github.com/maltman23/Brain_Machine_kit Brain Machine Github page]

==Contact==
'''Mitch Altman''': <mitch AT CornfieldElectronics DOT com> 
'''DECT''': 2676 (CORN)

== Map ==
[[File:HHA_map_39C3.jpg|600px|left|Location of Hardware Hacking Area]]

Brain Machine

2025-12-13T01:22:26Z

Maltman23: Created page with "= '''Make Your Own Brain Machine workshop''' = Fun using Brain Machines ==Dive into the fascinating world of neurotechnology and construct your very own Brain Machine under expert guidance! == This workshop will be given:    Day 4: Tuesday, 30-December, 1:00pm - 3:00pm '''NOTE: You do NOT need to register to take this workshop -- please show up early to ens..."

= '''Make Your Own Brain Machine workshop''' =
[[Image:BrainMachineKids.jpg|center|500px|Fun using Brain Machines]] 
==Dive into the fascinating world of neurotechnology and construct your very own Brain Machine under expert guidance! ==
 
This workshop will be given: 
   Day 4: Tuesday, 30-December, 1:00pm - 3:00pm 
 
'''NOTE: You do NOT need to register to take this workshop -- please show up early to ensure a seat at the Hardware Hacking Area.''' 
 

== Abstract: ==
[[File:BrainMachineWorkshopFabLabNK.jpg|right|500px|Brain Machine workshop at FabLabNK]] 
 
What is a [https://cornfieldelectronics.com/cfe/projects.php#brainmachine Brain Machine]? It's a fascinating device that generates light and sound pulses at brainwave frequencies. These can help achieve various states of consciousness, such as meditation or improved sleep. 
 
In this workshop for '''total beginners''' we will all make a '''[https://cornfieldelectronics.com/cfe/projects.php#brainmachine Brain Machine]'''
that is preprogrammed with a really nice meditation sequence. As well as a device that can help you relax and meditate, a nice bonus is that everyone hallucinates beautiful colors and patterns along the way. 

The Brain Machine is totally [https://github.com/maltman23/Brain_Machine_kit open hardware], and created to be hackable, so you can re-program it with any computer, with software that is free to download and use. 

This workshop is for ''**total beginners**'' to learn to solder. 

'''When''': 
   Day 4 (December 30th, Tuesday): 1:00pm - 3:00pm

== Full Description: ==
'''Learn to solder''' by making a way-cool, Sound & Light Machine, that will help you meditate, and hallucinate. It can also be re-programmed to help with sleep, and reduce brain fog. 
 
The '''[https://cornfieldelectronics.com/cfe/projects.php#brainmachine Brain Machine]''' is open hardware, and created to be hackable. 
 
This workshop is for '''total beginners''' to learn to solder. 
 
For ages 10 - 100. 
 
Taught by [http://en.wikipedia.org/wiki/Mitch_Altman Mitch Altman]. 
 
'''''Optional''': Bring your laptop if you want to go home with the free Arduino software installed on it. Arduino software runs on Windows, MacOS and Linux.''

'''Materials costs''' 
The workshop is free, but if you would like to partake in the hands-on aspects of the workshop, Mitch will have ArduTouch kits for '''€25'''. 

== Workshop Itinerary ==
* Intro to Sound & Light Machines

* Learn to solder. Don't let this scare you! I've taught tens of thousands of people to solder, most of whom have never made anything before in their lives. It is actually a very easy skill to learn. It is also very useful.

* How to re-program your Brain Machine for creating other brainwave sequences

== Summary ==
     '''What''': Make an [https://cornfieldelectronics.com/cfe/projects.php#brainmachine Brain Machine] 
     '''When''': 1:00pm to 3:00pm, Day 4 (Tuesday, December 30th) 

     '''Where''': Hardware Hacking Area (see Map, below) 
     '''Who''': Anyone and everyone can have fun making the Brain Machine Ages 10 to 100 
     '''Max #''': 25 participants -- '''''This workshop will fill up, so please do arrive early!''''' 
     '''Cost''': €25 for materials 

     '''Instructor''': [https://en.wikipedia.org/wiki/Mitch_Altman Mitch Altman]

     '''website:''' [https://cornfieldelectronics.com/cfe/projects.php#brainmachine Brain Machine kit] 

'''Buy a kit to guarantee a seat, or come by early! (And please do arrive early, regardless!)''' 
 
'''''Optional''': Bring your laptop if you want to go home with the free Arduino software installed on it. Arduino software runs on Windows, MacOS and Linux.''

== Links: ==
[https://cornfieldelectronics.com/cfe/projects.php#brainmachine Brain Machinekit] 
[http://www.arduino.cc/ Ardiuno website] 
[https://github.com/maltman23/Brain_Machine_kit Brain Machine Github page]

==Contact==
'''Mitch Altman''': <mitch AT CornfieldElectronics DOT com> 
'''DECT''': 2676 (CORN)

== Map ==
[[File:HHA_map_39C3.jpg|600px|left|Location of Hardware Hacking Area]]

File:BrainMachineWorkshopFabLabNK.jpg

2025-12-13T01:17:11Z

Maltman23: photo by Mitch Altman

== Summary ==
photo by Mitch Altman

File:BrainMachineKids.jpg

2025-12-13T01:14:39Z

Maltman23: fun using Brain Machines

== Summary ==
fun using Brain Machines

ArduinoForTotalNewbies

2025-12-13T00:31:47Z

Maltman23: update for 39C3

File:A4TN35C3.jpg

2025-12-13T00:31:13Z

Maltman23: photo by Mitch Altman

== Summary ==
photo by Mitch Altman

ArduTouch

2025-12-13T00:23:31Z

Maltman23: /* Abstract: */

= '''Music Generation for Newbies / Learn to Solder workshop -- ArduTouch music synthesizer''' =
[[Image:ArduTouch.jpg|center|500px|ArduTouch music synthesizer kit]] 
 
==''Anyone can learn to solder!'' ''And anyone can learn to make music, sound (and noise!) with computer chips!'' All participants will easily learn all of this by making an 
   '''[https://cornfieldelectronics.com/cfe/projects.php#ardutouch ArduTouch music synthesizer]''' from a kit.         '''For total beginners.''' ==
 
This workshop will be given: 
   Day 3: Monday, 29-December, 1:00pm - 3:30pm 
 
'''NOTE: You do NOT need to register to take this workshop -- please show up early to ensure a seat at the Hardware Hacking Area.''' 
 

== Abstract: ==
[[File:ArduTouchWorkshop36C3.jpg|right|500px|ArduTouch workshop at 36C3]] 

 
[https://cornfieldelectronics.com/cfe/projects.php#ardutouch ArduTouch] is an [https://github.com/maltman23/ArduTouch open source] '''Ardu'''ino-compatible music synthesizer kit with a built-in '''touch''' keyboard, and with built-in speaker/amplifier. 

 
This workshop is for '''''total newbies''''' to '''learn to solder''' and make their own ArduTouch music synthesizer. 

This workshop is for '''''total newbies''''' to '''learn the basics of how to make sound with computer chips.''' 

The ArduTouch comes pre-programmed with a way cool synthesizer. And I will show you how to re-program it with other way cool (and totally different) synthesizers, and how to make your own synthesizers. 

'''When''': 
   Day 3 (December 29th, Monday): 1:00pm - 3:30pm


== Full Description: ==
'''Learn to solder''' by making a way-cool, powerful music synthesizer, and 
'''learn how to make cool music, sound, (and noise!) with computer chips''' 
(The fancy word for making sound with a computer chip is ''Digital Signal Processing'' or ''DSP''). 
 
'''[https://cornfieldelectronics.com/cfe/projects.php#ardutouch ArduTouch]''' is an open hardware '''Ardu'''ino-compatible music synthesizer kit with a built-in '''Touch''' Keyboard, and with built-in speaker/amplifier. It is a really nice performing musical instrument. 
 
This workshop is for '''total newbies''' to learn to solder. 
This workshop is for '''total newbies''' to make their own ArduTouch music synthesizer and learn to make music, sound (and noise!) with computer chips. Attendees take their completed synthesiser home at the end of the workshop. 
 
The ArduTouch comes pre-programmed with a way cool synthesizer. And I will show you how to re-program it with other way cool (and totally different) synthesizers, as well as how to make your own synthesizers. 
 
For ages 10 - 100. 
 
Taught by [http://en.wikipedia.org/wiki/Mitch_Altman Mitch Altman]. 
 
'''''Optional''': Bring your laptop if you want to go home with the free Arduino software installed on it. Arduino software runs on Windows, MacOS and Linux.''

'''Materials costs''' 
The workshop is free, but if you would like to partake in the hands-on aspects of the workshop, Mitch will have ArduTouch kits for '''€35'''. 
''Optional'': USB-Serial Cable for re-programming ArduTouch (and many other projects): 5 €.'''

== Workshop Itinerary ==
* Intro to music synthesis

* Basics of making sound with computer chips (Digital Signal Processing)

* Basics of using an Arduino

* Learn to solder. Don't let this scare you! I've taught tens of thousands of people to solder, most of whom have never made anything before in their lives. It is actually a very easy skill to learn. It is also very useful.

* How to re-program your ArduTouch music synthesizer to make lots of cool music, sounds, (and noise!)

== Summary ==
     '''What''': Make an [https://cornfieldelectronics.com/cfe/projects.php#ardutouch ArduTouch music synthesizer] 
     '''When''': 1:00pm to 3:30pm, Day 3 (Monday, December 29th) 

     '''Where''': Hardware Hacking Area (see Map, below) 
     '''Who''': Anyone and everyone can have fun making the ArduTouch music synthesizer Ages 10 to 100 
     '''Max #''': 50 participants -- '''''This workshop will fill up, so please do arrive early!''''' 
     '''Cost''': €35 for materials -- (€40 if you also want a USB-Serial cable for re-programming the ArduTouch) 

     '''Instructor''': [https://en.wikipedia.org/wiki/Mitch_Altman Mitch Altman]

     '''website:''' [https://cornfieldelectronics.com/cfe/projects.php#ardutouch ArduTouch music synthesizer kit] 

'''Buy a kit to guarantee a seat, or come by early! (And please do arrive early, regardless!)''' 
 
'''''Optional''': Bring your laptop if you want to go home with the free Arduino software installed on it. Arduino software runs on Windows, MacOS and Linux.''

== Links: ==
[https://cornfieldelectronics.com/cfe/projects.php#ardutouch ArduTouch music synthesizer kit] 
[http://www.arduino.cc/ Ardiuno website] 
[https://github.com/maltman23/ArduTouch ArduTouch Github page]

==Contact==
'''Mitch Altman''': <mitch AT CornfieldElectronics DOT com> 
'''DECT''': 2676 (CORN)

== Map ==
[[File:HHA_map_39C3.jpg|600px|left|Location of Hardware Hacking Area]]

ArduTouch

2025-12-13T00:21:30Z

Maltman23: /* Abstract: */

= '''Music Generation for Newbies / Learn to Solder workshop -- ArduTouch music synthesizer''' =
[[Image:ArduTouch.jpg|center|500px|ArduTouch music synthesizer kit]] 
 
==''Anyone can learn to solder!'' ''And anyone can learn to make music, sound (and noise!) with computer chips!'' All participants will easily learn all of this by making an 
   '''[https://cornfieldelectronics.com/cfe/projects.php#ardutouch ArduTouch music synthesizer]''' from a kit.         '''For total beginners.''' ==
 
This workshop will be given: 
   Day 3: Monday, 29-December, 1:00pm - 3:30pm 
 
'''NOTE: You do NOT need to register to take this workshop -- please show up early to ensure a seat at the Hardware Hacking Area.''' 
 

== Abstract: ==
[[File:ArduTouchWorkshop36C3.jpg|right|500px|ArduTouch workshop at 36C3]] 

 
[https://cornfieldelectronics.com/cfe/projects.php#ardutouch ArduTouch] is an [https://github.com/maltman23/ArduTouch open source] '''Ardu'''ino-compatible music synthesizer kit with a built-in '''touch''' keyboard, and with built-in speaker/amplifier. 

 
This workshop is for '''''total newbies''''' to '''learn to solder''' and make their own ArduTouch music synthesizer. 

This workshop is for '''''total newbies''''' to '''learn the basics of how to make sound with computer chips.''' 

The ArduTouch comes pre-programmed with a way cool synthesizer. And I will show you how to re-program it with other way cool (and totally different) synthesizers, and how to make your own synthesizers. 

'''When''': 
   Day 3 (December 29th, Monday): 1:00pm - 3:30pm


== Full Description: ==
'''Learn to solder''' by making a way-cool, powerful music synthesizer, and 
'''learn how to make cool music, sound, (and noise!) with computer chips''' 
(The fancy word for making sound with a computer chip is ''Digital Signal Processing'' or ''DSP''). 
 
'''[https://cornfieldelectronics.com/cfe/projects.php#ardutouch ArduTouch]''' is an open hardware '''Ardu'''ino-compatible music synthesizer kit with a built-in '''Touch''' Keyboard, and with built-in speaker/amplifier. It is a really nice performing musical instrument. 
 
This workshop is for '''total newbies''' to learn to solder. 
This workshop is for '''total newbies''' to make their own ArduTouch music synthesizer and learn to make music, sound (and noise!) with computer chips. Attendees take their completed synthesiser home at the end of the workshop. 
 
The ArduTouch comes pre-programmed with a way cool synthesizer. And I will show you how to re-program it with other way cool (and totally different) synthesizers, as well as how to make your own synthesizers. 
 
For ages 10 - 100. 
 
Taught by [http://en.wikipedia.org/wiki/Mitch_Altman Mitch Altman]. 
 
'''''Optional''': Bring your laptop if you want to go home with the free Arduino software installed on it. Arduino software runs on Windows, MacOS and Linux.''

'''Materials costs''' 
The workshop is free, but if you would like to partake in the hands-on aspects of the workshop, Mitch will have ArduTouch kits for '''€35'''. 
''Optional'': USB-Serial Cable for re-programming ArduTouch (and many other projects): 5 €.'''

== Workshop Itinerary ==
* Intro to music synthesis

* Basics of making sound with computer chips (Digital Signal Processing)

* Basics of using an Arduino

* Learn to solder. Don't let this scare you! I've taught tens of thousands of people to solder, most of whom have never made anything before in their lives. It is actually a very easy skill to learn. It is also very useful.

* How to re-program your ArduTouch music synthesizer to make lots of cool music, sounds, (and noise!)

== Summary ==
     '''What''': Make an [https://cornfieldelectronics.com/cfe/projects.php#ardutouch ArduTouch music synthesizer] 
     '''When''': 1:00pm to 3:30pm, Day 3 (Monday, December 29th) 

     '''Where''': Hardware Hacking Area (see Map, below) 
     '''Who''': Anyone and everyone can have fun making the ArduTouch music synthesizer Ages 10 to 100 
     '''Max #''': 50 participants -- '''''This workshop will fill up, so please do arrive early!''''' 
     '''Cost''': €35 for materials -- (€40 if you also want a USB-Serial cable for re-programming the ArduTouch) 

     '''Instructor''': [https://en.wikipedia.org/wiki/Mitch_Altman Mitch Altman]

     '''website:''' [https://cornfieldelectronics.com/cfe/projects.php#ardutouch ArduTouch music synthesizer kit] 

'''Buy a kit to guarantee a seat, or come by early! (And please do arrive early, regardless!)''' 
 
'''''Optional''': Bring your laptop if you want to go home with the free Arduino software installed on it. Arduino software runs on Windows, MacOS and Linux.''

== Links: ==
[https://cornfieldelectronics.com/cfe/projects.php#ardutouch ArduTouch music synthesizer kit] 
[http://www.arduino.cc/ Ardiuno website] 
[https://github.com/maltman23/ArduTouch ArduTouch Github page]

==Contact==
'''Mitch Altman''': <mitch AT CornfieldElectronics DOT com> 
'''DECT''': 2676 (CORN)

== Map ==
[[File:HHA_map_39C3.jpg|600px|left|Location of Hardware Hacking Area]]

File:ArduTouchWorkshop36C3.jpg

2025-12-13T00:21:16Z

Maltman23: photo by Mitch Altman

== Summary ==
photo by Mitch Altman

ArduTouch

2025-12-13T00:10:08Z

Maltman23: /* Music Generation for Newbies / Learn to Solder workshop -- ArduTouch music synthesizer */

= '''Music Generation for Newbies / Learn to Solder workshop -- ArduTouch music synthesizer''' =
[[Image:ArduTouch.jpg|center|500px|ArduTouch music synthesizer kit]] 
 
==''Anyone can learn to solder!'' ''And anyone can learn to make music, sound (and noise!) with computer chips!'' All participants will easily learn all of this by making an 
   '''[https://cornfieldelectronics.com/cfe/projects.php#ardutouch ArduTouch music synthesizer]''' from a kit.         '''For total beginners.''' ==
 
This workshop will be given: 
   Day 3: Monday, 29-December, 1:00pm - 3:30pm 
 
'''NOTE: You do NOT need to register to take this workshop -- please show up early to ensure a seat at the Hardware Hacking Area.''' 
 

== Abstract: ==
[[File:ArduTouchWorkshopEMF.jpg|right|500px|ArduTouch workshop at EMF Camp 2018]] 

 
[https://cornfieldelectronics.com/cfe/projects.php#ardutouch ArduTouch] is an [https://github.com/maltman23/ArduTouch open source] '''Ardu'''ino-compatible music synthesizer kit with a built-in '''touch''' keyboard, and with built-in speaker/amplifier. 

 
This workshop is for '''''total newbies''''' to '''learn to solder''' and make their own ArduTouch music synthesizer. 

This workshop is for '''''total newbies''''' to '''learn the basics of how to make sound with computer chips.''' 

The ArduTouch comes pre-programmed with a way cool synthesizer. And I will show you how to re-program it with other way cool (and totally different) synthesizers, and how to make your own synthesizers. 

'''When''': 
   Day 3 (December 29th, Monday): 1:00pm - 3:30pm


== Full Description: ==
'''Learn to solder''' by making a way-cool, powerful music synthesizer, and 
'''learn how to make cool music, sound, (and noise!) with computer chips''' 
(The fancy word for making sound with a computer chip is ''Digital Signal Processing'' or ''DSP''). 
 
'''[https://cornfieldelectronics.com/cfe/projects.php#ardutouch ArduTouch]''' is an open hardware '''Ardu'''ino-compatible music synthesizer kit with a built-in '''Touch''' Keyboard, and with built-in speaker/amplifier. It is a really nice performing musical instrument. 
 
This workshop is for '''total newbies''' to learn to solder. 
This workshop is for '''total newbies''' to make their own ArduTouch music synthesizer and learn to make music, sound (and noise!) with computer chips. Attendees take their completed synthesiser home at the end of the workshop. 
 
The ArduTouch comes pre-programmed with a way cool synthesizer. And I will show you how to re-program it with other way cool (and totally different) synthesizers, as well as how to make your own synthesizers. 
 
For ages 10 - 100. 
 
Taught by [http://en.wikipedia.org/wiki/Mitch_Altman Mitch Altman]. 
 
'''''Optional''': Bring your laptop if you want to go home with the free Arduino software installed on it. Arduino software runs on Windows, MacOS and Linux.''

'''Materials costs''' 
The workshop is free, but if you would like to partake in the hands-on aspects of the workshop, Mitch will have ArduTouch kits for '''€35'''. 
''Optional'': USB-Serial Cable for re-programming ArduTouch (and many other projects): 5 €.'''

== Workshop Itinerary ==
* Intro to music synthesis

* Basics of making sound with computer chips (Digital Signal Processing)

* Basics of using an Arduino

* Learn to solder. Don't let this scare you! I've taught tens of thousands of people to solder, most of whom have never made anything before in their lives. It is actually a very easy skill to learn. It is also very useful.

* How to re-program your ArduTouch music synthesizer to make lots of cool music, sounds, (and noise!)

== Summary ==
     '''What''': Make an [https://cornfieldelectronics.com/cfe/projects.php#ardutouch ArduTouch music synthesizer] 
     '''When''': 1:00pm to 3:30pm, Day 3 (Monday, December 29th) 

     '''Where''': Hardware Hacking Area (see Map, below) 
     '''Who''': Anyone and everyone can have fun making the ArduTouch music synthesizer Ages 10 to 100 
     '''Max #''': 50 participants -- '''''This workshop will fill up, so please do arrive early!''''' 
     '''Cost''': €35 for materials -- (€40 if you also want a USB-Serial cable for re-programming the ArduTouch) 

     '''Instructor''': [https://en.wikipedia.org/wiki/Mitch_Altman Mitch Altman]

     '''website:''' [https://cornfieldelectronics.com/cfe/projects.php#ardutouch ArduTouch music synthesizer kit] 

'''Buy a kit to guarantee a seat, or come by early! (And please do arrive early, regardless!)''' 
 
'''''Optional''': Bring your laptop if you want to go home with the free Arduino software installed on it. Arduino software runs on Windows, MacOS and Linux.''

== Links: ==
[https://cornfieldelectronics.com/cfe/projects.php#ardutouch ArduTouch music synthesizer kit] 
[http://www.arduino.cc/ Ardiuno website] 
[https://github.com/maltman23/ArduTouch ArduTouch Github page]

==Contact==
'''Mitch Altman''': <mitch AT CornfieldElectronics DOT com> 
'''DECT''': 2676 (CORN)

== Map ==
[[File:HHA_map_39C3.jpg|600px|left|Location of Hardware Hacking Area]]

File:HHA map 39C3.jpg

2025-12-13T00:09:50Z

Maltman23: map of Hardware Hacking Area in Halle 3 at CCH for 39C3

== Summary ==
map of Hardware Hacking Area in Halle 3 at CCH for 39C3

ArduTouch

2025-12-13T00:05:13Z

Maltman23: /* Anyone can learn to solder!And anyone can learn to make music, sound (and noise!) with computer chips!All participants will easily learn all of this by making an ArduTouch music synthesizer from a kit.        For total beginners. */

= '''Music Generation for Newbies / Learn to Solder workshop -- ArduTouch music synthesizer''' =
[[Image:ArduTouch.jpg|center|500px|ArduTouch music synthesizer kit]] 
 
==''Anyone can learn to solder!'' ''And anyone can learn to make music, sound (and noise!) with computer chips!'' All participants will easily learn all of this by making an '''[https://cornfieldelectronics.com/cfe/projects.php#ardutouch ArduTouch music synthesizer]''' from a kit.         '''For total beginners.''' ==
 
This workshop will be given: 
   Day 3: Monday, 29-December, 1:00pm - 3:30pm 
 
'''NOTE: You do NOT need to register to take this workshop -- please show up early to ensure a seat at the Hardware Hacking Area.''' 
 

== Abstract: ==
[[File:ArduTouchWorkshopEMF.jpg|right|500px|ArduTouch workshop at EMF Camp 2018]] 

 
[https://cornfieldelectronics.com/cfe/projects.php#ardutouch ArduTouch] is an [https://github.com/maltman23/ArduTouch open source] '''Ardu'''ino-compatible music synthesizer kit with a built-in '''touch''' keyboard, and with built-in speaker/amplifier. 

 
This workshop is for '''''total newbies''''' to '''learn to solder''' and make their own ArduTouch music synthesizer. 

This workshop is for '''''total newbies''''' to '''learn the basics of how to make sound with computer chips.''' 

The ArduTouch comes pre-programmed with a way cool synthesizer. And I will show you how to re-program it with other way cool (and totally different) synthesizers, and how to make your own synthesizers. 

'''When''': 
   Day 3 (December 29th, Monday): 1:00pm - 3:30pm


== Full Description: ==
'''Learn to solder''' by making a way-cool, powerful music synthesizer, and 
'''learn how to make cool music, sound, (and noise!) with computer chips''' 
(The fancy word for making sound with a computer chip is ''Digital Signal Processing'' or ''DSP''). 
 
'''[https://cornfieldelectronics.com/cfe/projects.php#ardutouch ArduTouch]''' is an open hardware '''Ardu'''ino-compatible music synthesizer kit with a built-in '''Touch''' Keyboard, and with built-in speaker/amplifier. It is a really nice performing musical instrument. 
 
This workshop is for '''total newbies''' to learn to solder. 
This workshop is for '''total newbies''' to make their own ArduTouch music synthesizer and learn to make music, sound (and noise!) with computer chips. Attendees take their completed synthesiser home at the end of the workshop. 
 
The ArduTouch comes pre-programmed with a way cool synthesizer. And I will show you how to re-program it with other way cool (and totally different) synthesizers, as well as how to make your own synthesizers. 
 
For ages 10 - 100. 
 
Taught by [http://en.wikipedia.org/wiki/Mitch_Altman Mitch Altman]. 
 
'''''Optional''': Bring your laptop if you want to go home with the free Arduino software installed on it. Arduino software runs on Windows, MacOS and Linux.''

'''Materials costs''' 
The workshop is free, but if you would like to partake in the hands-on aspects of the workshop, Mitch will have ArduTouch kits for '''€35'''. 
''Optional'': USB-Serial Cable for re-programming ArduTouch (and many other projects): 5 €.'''

== Workshop Itinerary ==
* Intro to music synthesis

* Basics of making sound with computer chips (Digital Signal Processing)

* Basics of using an Arduino

* Learn to solder. Don't let this scare you! I've taught tens of thousands of people to solder, most of whom have never made anything before in their lives. It is actually a very easy skill to learn. It is also very useful.

* How to re-program your ArduTouch music synthesizer to make lots of cool music, sounds, (and noise!)

== Summary ==
     '''What''': Make an [https://cornfieldelectronics.com/cfe/projects.php#ardutouch ArduTouch music synthesizer] 

     '''When''': 8:00pm to 10:30pm, Day 2 (Saturday, August 9th) 
     '''Where''': Hardware Hacking Area Village (see Map, below) 
     '''Who''': Anyone and everyone can have fun making the ArduTouch music synthesizer Ages 10 to 100 
     '''Max #''': 35 participants -- '''''This workshop will fill up, so please do arrive early!''''' 
     '''Cost''': €35 for materials -- (€40 if you also want a USB-Serial cable for re-programming the ArduTouch) 

     '''Instructor''': [https://en.wikipedia.org/wiki/Mitch_Altman Mitch Altman]

     '''website:''' [https://cornfieldelectronics.com/cfe/projects.php#ardutouch ArduTouch music synthesizer kit] 

'''Buy a kit to guarantee a seat, or come by early! (And please do arrive early, regardless!)''' 
 
'''''Optional''': Bring your laptop if you want to go home with the free Arduino software installed on it. Arduino software runs on Windows, MacOS and Linux.''

== Links: ==
[https://cornfieldelectronics.com/cfe/projects.php#ardutouch ArduTouch music synthesizer kit] 
[http://www.arduino.cc/ Ardiuno website] 
[https://github.com/maltman23/ArduTouch ArduTouch Github page]

==Contact==
'''Mitch Altman''': <mitch AT CornfieldElectronics DOT com> 
'''DECT''': 2676 (CORN)

== Map ==
[[File:HHA_map_WHY.jpg|600px|left|Location of Hardware Hacking Area Village]]

ArduTouch

2025-12-13T00:03:37Z

Maltman23: /* Abstract: */ update for 39C3

= '''Music Generation for Newbies / Learn to Solder workshop -- ArduTouch music synthesizer''' =
[[Image:ArduTouch.jpg|center|500px|ArduTouch music synthesizer kit]] 
 
==''Anyone can learn to solder!'' ''And anyone can learn to make music, sound (and noise!) with computer chips!'' All participants will easily learn all of this by making an '''[https://cornfieldelectronics.com/cfe/projects.php#ardutouch ArduTouch music synthesizer]''' from a kit.         '''For total beginners.''' ==
 
This workshop will be given: 
   Day 2: Saturday, 9-August, 8:00pm - 10:30pm 
 
'''NOTE: You do NOT need to register to take this workshop -- please show up early to ensure a seat at the Hardware Hacking Area Village.''' 
 

== Abstract: ==
[[File:ArduTouchWorkshopEMF.jpg|right|500px|ArduTouch workshop at EMF Camp 2018]] 

 
[https://cornfieldelectronics.com/cfe/projects.php#ardutouch ArduTouch] is an [https://github.com/maltman23/ArduTouch open source] '''Ardu'''ino-compatible music synthesizer kit with a built-in '''touch''' keyboard, and with built-in speaker/amplifier. 

 
This workshop is for '''''total newbies''''' to '''learn to solder''' and make their own ArduTouch music synthesizer. 

This workshop is for '''''total newbies''''' to '''learn the basics of how to make sound with computer chips.''' 

The ArduTouch comes pre-programmed with a way cool synthesizer. And I will show you how to re-program it with other way cool (and totally different) synthesizers, and how to make your own synthesizers. 

'''When''': 
   Day 3 (December 29th, Monday): 1:00pm - 3:30pm


== Full Description: ==
'''Learn to solder''' by making a way-cool, powerful music synthesizer, and 
'''learn how to make cool music, sound, (and noise!) with computer chips''' 
(The fancy word for making sound with a computer chip is ''Digital Signal Processing'' or ''DSP''). 
 
'''[https://cornfieldelectronics.com/cfe/projects.php#ardutouch ArduTouch]''' is an open hardware '''Ardu'''ino-compatible music synthesizer kit with a built-in '''Touch''' Keyboard, and with built-in speaker/amplifier. It is a really nice performing musical instrument. 
 
This workshop is for '''total newbies''' to learn to solder. 
This workshop is for '''total newbies''' to make their own ArduTouch music synthesizer and learn to make music, sound (and noise!) with computer chips. Attendees take their completed synthesiser home at the end of the workshop. 
 
The ArduTouch comes pre-programmed with a way cool synthesizer. And I will show you how to re-program it with other way cool (and totally different) synthesizers, as well as how to make your own synthesizers. 
 
For ages 10 - 100. 
 
Taught by [http://en.wikipedia.org/wiki/Mitch_Altman Mitch Altman]. 
 
'''''Optional''': Bring your laptop if you want to go home with the free Arduino software installed on it. Arduino software runs on Windows, MacOS and Linux.''

'''Materials costs''' 
The workshop is free, but if you would like to partake in the hands-on aspects of the workshop, Mitch will have ArduTouch kits for '''€35'''. 
''Optional'': USB-Serial Cable for re-programming ArduTouch (and many other projects): 5 €.'''

== Workshop Itinerary ==
* Intro to music synthesis

* Basics of making sound with computer chips (Digital Signal Processing)

* Basics of using an Arduino

* Learn to solder. Don't let this scare you! I've taught tens of thousands of people to solder, most of whom have never made anything before in their lives. It is actually a very easy skill to learn. It is also very useful.

* How to re-program your ArduTouch music synthesizer to make lots of cool music, sounds, (and noise!)

== Summary ==
     '''What''': Make an [https://cornfieldelectronics.com/cfe/projects.php#ardutouch ArduTouch music synthesizer] 

     '''When''': 8:00pm to 10:30pm, Day 2 (Saturday, August 9th) 
     '''Where''': Hardware Hacking Area Village (see Map, below) 
     '''Who''': Anyone and everyone can have fun making the ArduTouch music synthesizer Ages 10 to 100 
     '''Max #''': 35 participants -- '''''This workshop will fill up, so please do arrive early!''''' 
     '''Cost''': €35 for materials -- (€40 if you also want a USB-Serial cable for re-programming the ArduTouch) 

     '''Instructor''': [https://en.wikipedia.org/wiki/Mitch_Altman Mitch Altman]

     '''website:''' [https://cornfieldelectronics.com/cfe/projects.php#ardutouch ArduTouch music synthesizer kit] 

'''Buy a kit to guarantee a seat, or come by early! (And please do arrive early, regardless!)''' 
 
'''''Optional''': Bring your laptop if you want to go home with the free Arduino software installed on it. Arduino software runs on Windows, MacOS and Linux.''

== Links: ==
[https://cornfieldelectronics.com/cfe/projects.php#ardutouch ArduTouch music synthesizer kit] 
[http://www.arduino.cc/ Ardiuno website] 
[https://github.com/maltman23/ArduTouch ArduTouch Github page]

==Contact==
'''Mitch Altman''': <mitch AT CornfieldElectronics DOT com> 
'''DECT''': 2676 (CORN)

== Map ==
[[File:HHA_map_WHY.jpg|600px|left|Location of Hardware Hacking Area Village]]

39c3-participant-list

2025-10-22T22:59:48Z

Maltman23: /* ticket in status paid */

= 39c3 participant list =

== has voucher ==
# Mau
# junglerot
# chewymoose (Amy)
# sannoso

== has bought tickets, status pending ==
# korkenzieher

== ticket in status paid ==
# kgz
# kgz +1
# wasamasa
# katia
# haegar
# zornem
# ax
# calisti
# calisti +1
# willscott
# willscott +1
# carton
# stemnic
# cqc
# cqc +1
# zoda - THN
# Aja - THN
# greymn
# Matty - THN
# Anh - THN
# Kevin - THN
# Jet - THN
# cqc +2
# sleepyentropy
# sleepyentropy +1
# mc.fly (angel voucher)
# no_maam (angel voucher)
# obsidian
# oakkitten
# stephan48 (angel voucher)
# murb (angel voucher)
# tr4ck3ur
# tr4ck3ur +1
# blende666
# blende666 +1
# vivian
# stoffel
# josiedotlol
# pitastrudl
# pitastrudl +1
# boreq
# boreq + 1
# maltman23 (voucher sent via Matrix -- ticket bought with credit card 10.23 00:50)

39c3-participant-list

2025-10-22T22:58:07Z

Maltman23: /* has voucher */

39c3-voucher-queue

2025-08-15T19:32:05Z

Maltman23:

==The voucher queue of 39c3==

One person per line! If you need 2 tickets you need 2 lines.
This is so that we can use the count functionality of the Mediawiki.

Furthermore please make sure that the people handling this vouchers later have a way to contact you.
Being in the matrix / irc room with the same nick (and actually reading that) should do it.

=== wants a ticket ===

# mc.fly
# stemnic
# junglerot
# chewymoose (Amy)
# hanemile
# kgz
# kgz +1
# boreq
# boreq + 1
# wasamasa
# obsidian
# oakkitten
# Nyx
# blende666
# blende666 +1
# katia
# willscott
# willscott +1
# cqc
# cqc +1
# ax
# josiedotlol
# maltman23
# add yourself...

ArduinoForTotalNewbies

2025-08-01T11:44:51Z

Maltman23: /* Abstract: */

= Arduino For Total Newbies workshop =

== ''Learn Arduino using TV-B-Gone as an example project'' ==
 
This workshop will be given: 

   Day 3: Sunday, 10-August, 2:00pm - 5:30pm 
   at the '''Hardware Hacking Area Village''' (see map below) 
 
'''NOTE: You do NOT need to register to take this workshop -- please show up early to ensure a seat at the Hardware Hacking Area.''' 
 

== Abstract: ==

[[File:A4TN_EMF_Camp_2022.jpg|thumb|right|Arduino For Total Newbies workshop at EMF Camp 2022]]
[[File:A4TN.jpg|thumb|right|Arduino For Total Newbies workshop 29-March-2015 at Noisebridge]]

''Learn Arduino using TV-B-Gone as an example project'' 
 
You've probably heard lots about [http://arduino.cc/ Arduino]. But if you don't know what it is, or how you can use it to do all sorts of cool things, then this fun and easy workshop is for you. As an example project, we'll be creating a [http://www.tvbgone.com TV-B-Gone] remote control out of an [http://arduino.cc/ Arduino] you can take home with you.
 
'''When''': 

   Day 3 (August 10th, Sunday): 
      2:00pm - 5:30pm 
      at the '''Hardware Hacking Area Village''' (see map below) 

'''More info''' on the Arduino For Total Newbies workshop page: 
[http://cornfieldelectronics.com/cfe/projects/tvbg_arduino/tvbg_arduino_workshop.php Arduino For Total Newbies workshop page]

== Full Description: ==
'''[http://arduino.cc/ Arduino]''' is an amazingly powerful tool that is very simple to learn to use. It was designed so that artists and non-geeks can start from nothing, and make something cool happen in less than 90 minutes. Yet, it is powerful enough so that experienced expert geeks can use it for their projects as well.

This workshop is easy enough for '''''total newbies''''' to '''learn all you need to know to get going on an Arduino.'''

Participants will make their own Arduino clone, and set it up on solderless breadboards to make their own [http://www.tvbgone.com TV-B-Gone] remote control to turn off TVs in public places -- a fun way to learn Arduino (and electronics) basics. Bring your laptop, if you can.

Taught by [http://en.wikipedia.org/wiki/Mitch_Altman Mitch Altman].

''Big thanks to Ken Shirriff, who came up with the original [http://www.arcfn.com/2009/12/tv-b-gone-for-arduino.html TV-B-Gone for Arduino].''

'''''Optional''''': Bring your laptop if you want to go home with the free Arduino software installed on it. 
Arduino software runs on Windows, MacOS and Linux._ 

'''Materials costs''': 
The workshop is free, but if you would like to partake in the hands-on aspects of the workshop, Mitch will have materials for '''€40''' (useful for making many different cool projects).

'''Workshop page:''' 
[http://cornfieldelectronics.com/cfe/projects/tvbg_arduino/tvbg_arduino_workshop.php Arduino For Total Newbies workshop page]

== Workshop Itinerary ==
* Intro to Arduino

* Very short lesson to learn everything you need to know about electronics!

* Then we will learn to solder. Don't let this scare you! I've taught tens of thousands of people to solder, most of whom have never made anything before in their lives. It is actually a very easy skill to learn. It is also very useful.

* Then we will each make our own Arduino clone from a kit made by Samurai Circuits: [https://cornfieldelectronics.com/cfe/u_do_it_duino_complete.php U-Do-It-Duino].

* Now that we each have our own Arduino board, we will set up the free and open-source Arduino software on our laptops (if you bring one) -- Windows, Linux, and MacOS are all fine!

* And then its time to make something and learn how easy it is to use Arduino! I'll (very easily!) show you how to read schematic diagrams, and you'll put together your own TV-B-Gone remote control using your Arduino clone board. We will use a solderless breadboard. These are really useful, and provide a fast, and very easy way to put circuits together without needing to solder.

* Target practice is available all over the world after the workshop.

== Summary ==
     '''What''': [http://arduino.cc/ Arduino] workshop for total newbies, using [http://www.tvbgone.com TV-B-Gone] remote controls as an intro 

     '''When''': 2:00pm-5:30pm, Day 3 (10-August, Sunday) 
     '''Where''': Hardware Hacking Area Village (see map, below) 
     '''Who''': Anyone and everyone can have fun learning Arduino. Ages 10 to 100 
     '''Max #''': 35 participants -- '''''This workshop will fill up, so please do arrive early!''''' 
     '''Cost''': €40 for materials -- includes everything you need to make your [http://www.arcfn.com/2009/12/tv-b-gone-for-arduino.html Arduino TV-B-Gone]! 
          And you get to bring home your [http://www.arcfn.com/2009/12/tv-b-gone-for-arduino.html Arduino TV-B-Gone] and all materials to play with Arduino at home (or wherever you want). 

     '''Instructor''': [https://en.wikipedia.org/wiki/Mitch_Altman Mitch Altman]

     '''website:''' [http://cornfieldelectronics.com/cfe/projects/tvbg_arduino/tvbg_arduino_workshop.php Arduino For Total Newbies workshop page] 

'''Buy a kit to guarantee a seat, or come by early! (And please do arrive early, regardless!)''' 
 
'''''Optional''': Bring your laptop if you want to go home with the free Arduino software installed on it. Arduino software runs on Windows, MacOS and Linux.''

== Links: ==
'''[http://cornfieldelectronics.com/cfe/projects/tvbg_arduino/tvbg_arduino_workshop.php Arduino For Total Newbies webpage] '''
[http://www.tvbgone.com TV-B-Gone website] 
[http://www.arduino.cc/ Ardiuno website] 
[http://www.arcfn.com/2009/12/tv-b-gone-for-arduino.html Ken Shirriff's TV-B-Gone Arduino project page] 
[https://cornfieldelectronics.com/cfe/u_do_it_duino_complete.php U-Do-It-Duino] 


==Contact==
'''Mitch Altman''': <mitch AT CornfieldElectronics DOT com> 
'''DECT''': 2676 (CORN)

== Map ==
[[File:HHA_map_WHY.jpg|600px|left|Location of Hardware Hacking Area Village]]

ArduinoForTotalNewbies

2025-08-01T11:42:42Z

Maltman23: /* Learn Arduino using TV-B-Gone as an example project */ change for WHY

= Arduino For Total Newbies workshop =

== ''Learn Arduino using TV-B-Gone as an example project'' ==
 
This workshop will be given: 

   Day 3: Sunday, 10-August, 2:00pm - 5:30pm 
   at the '''Hardware Hacking Area Village''' (see map below) 
 
'''NOTE: You do NOT need to register to take this workshop -- please show up early to ensure a seat at the Hardware Hacking Area.''' 
 

== Abstract: ==

[[File:A4TN_EMF_Camp_2022.jpg|thumb|right|Arduino For Total Newbies workshop at EMF Camp 2022]]
[[File:A4TN.jpg|thumb|right|Arduino For Total Newbies workshop 29-March-2015 at Noisebridge]]

''Learn Arduino using TV-B-Gone as an example project'' 
 
You've probably heard lots about [http://arduino.cc/ Arduino]. But if you don't know what it is, or how you can use it to do all sorts of cool things, then this fun and easy workshop is for you. As an example project, we'll be creating a [http://www.tvbgone.com TV-B-Gone] remote control out of an [http://arduino.cc/ Arduino] you can take home with you.
 
'''When''': 

   Day 3 (August 10th, Sunday):       2:00pm - 5:30pm

'''More info''' on the Arduino For Total Newbies workshop page: 
[http://cornfieldelectronics.com/cfe/projects/tvbg_arduino/tvbg_arduino_workshop.php Arduino For Total Newbies workshop page]

== Full Description: ==
'''[http://arduino.cc/ Arduino]''' is an amazingly powerful tool that is very simple to learn to use. It was designed so that artists and non-geeks can start from nothing, and make something cool happen in less than 90 minutes. Yet, it is powerful enough so that experienced expert geeks can use it for their projects as well.

This workshop is easy enough for '''''total newbies''''' to '''learn all you need to know to get going on an Arduino.'''

Participants will make their own Arduino clone, and set it up on solderless breadboards to make their own [http://www.tvbgone.com TV-B-Gone] remote control to turn off TVs in public places -- a fun way to learn Arduino (and electronics) basics. Bring your laptop, if you can.

Taught by [http://en.wikipedia.org/wiki/Mitch_Altman Mitch Altman].

''Big thanks to Ken Shirriff, who came up with the original [http://www.arcfn.com/2009/12/tv-b-gone-for-arduino.html TV-B-Gone for Arduino].''

'''''Optional''''': Bring your laptop if you want to go home with the free Arduino software installed on it. 
Arduino software runs on Windows, MacOS and Linux._ 

'''Materials costs''': 
The workshop is free, but if you would like to partake in the hands-on aspects of the workshop, Mitch will have materials for '''€40''' (useful for making many different cool projects).

'''Workshop page:''' 
[http://cornfieldelectronics.com/cfe/projects/tvbg_arduino/tvbg_arduino_workshop.php Arduino For Total Newbies workshop page]

== Workshop Itinerary ==
* Intro to Arduino

* Very short lesson to learn everything you need to know about electronics!

* Then we will learn to solder. Don't let this scare you! I've taught tens of thousands of people to solder, most of whom have never made anything before in their lives. It is actually a very easy skill to learn. It is also very useful.

* Then we will each make our own Arduino clone from a kit made by Samurai Circuits: [https://cornfieldelectronics.com/cfe/u_do_it_duino_complete.php U-Do-It-Duino].

* Now that we each have our own Arduino board, we will set up the free and open-source Arduino software on our laptops (if you bring one) -- Windows, Linux, and MacOS are all fine!

* And then its time to make something and learn how easy it is to use Arduino! I'll (very easily!) show you how to read schematic diagrams, and you'll put together your own TV-B-Gone remote control using your Arduino clone board. We will use a solderless breadboard. These are really useful, and provide a fast, and very easy way to put circuits together without needing to solder.

* Target practice is available all over the world after the workshop.

== Summary ==
     '''What''': [http://arduino.cc/ Arduino] workshop for total newbies, using [http://www.tvbgone.com TV-B-Gone] remote controls as an intro 

     '''When''': 2:00pm-5:30pm, Day 3 (10-August, Sunday) 
     '''Where''': Hardware Hacking Area Village (see map, below) 
     '''Who''': Anyone and everyone can have fun learning Arduino. Ages 10 to 100 
     '''Max #''': 35 participants -- '''''This workshop will fill up, so please do arrive early!''''' 
     '''Cost''': €40 for materials -- includes everything you need to make your [http://www.arcfn.com/2009/12/tv-b-gone-for-arduino.html Arduino TV-B-Gone]! 
          And you get to bring home your [http://www.arcfn.com/2009/12/tv-b-gone-for-arduino.html Arduino TV-B-Gone] and all materials to play with Arduino at home (or wherever you want). 

     '''Instructor''': [https://en.wikipedia.org/wiki/Mitch_Altman Mitch Altman]

     '''website:''' [http://cornfieldelectronics.com/cfe/projects/tvbg_arduino/tvbg_arduino_workshop.php Arduino For Total Newbies workshop page] 

'''Buy a kit to guarantee a seat, or come by early! (And please do arrive early, regardless!)''' 
 
'''''Optional''': Bring your laptop if you want to go home with the free Arduino software installed on it. Arduino software runs on Windows, MacOS and Linux.''

== Links: ==
'''[http://cornfieldelectronics.com/cfe/projects/tvbg_arduino/tvbg_arduino_workshop.php Arduino For Total Newbies webpage] '''
[http://www.tvbgone.com TV-B-Gone website] 
[http://www.arduino.cc/ Ardiuno website] 
[http://www.arcfn.com/2009/12/tv-b-gone-for-arduino.html Ken Shirriff's TV-B-Gone Arduino project page] 
[https://cornfieldelectronics.com/cfe/u_do_it_duino_complete.php U-Do-It-Duino] 


==Contact==
'''Mitch Altman''': <mitch AT CornfieldElectronics DOT com> 
'''DECT''': 2676 (CORN)

== Map ==
[[File:HHA_map_WHY.jpg|600px|left|Location of Hardware Hacking Area Village]]

ArduinoForTotalNewbies

2025-08-01T11:42:15Z

Maltman23:

= Arduino For Total Newbies workshop =

== ''Learn Arduino using TV-B-Gone as an example project'' ==
 
This workshop will be given: 

   Day 3: Sunday, 10-August, 2:00 - 5:30 
   at the '''Hardware Hacking Area Village''' (see map below) 
 
'''NOTE: You do NOT need to register to take this workshop -- please show up early to ensure a seat at the Hardware Hacking Area.''' 
 

== Abstract: ==

[[File:A4TN_EMF_Camp_2022.jpg|thumb|right|Arduino For Total Newbies workshop at EMF Camp 2022]]
[[File:A4TN.jpg|thumb|right|Arduino For Total Newbies workshop 29-March-2015 at Noisebridge]]

''Learn Arduino using TV-B-Gone as an example project'' 
 
You've probably heard lots about [http://arduino.cc/ Arduino]. But if you don't know what it is, or how you can use it to do all sorts of cool things, then this fun and easy workshop is for you. As an example project, we'll be creating a [http://www.tvbgone.com TV-B-Gone] remote control out of an [http://arduino.cc/ Arduino] you can take home with you.
 
'''When''': 

   Day 3 (August 10th, Sunday):       2:00pm - 5:30pm

'''More info''' on the Arduino For Total Newbies workshop page: 
[http://cornfieldelectronics.com/cfe/projects/tvbg_arduino/tvbg_arduino_workshop.php Arduino For Total Newbies workshop page]

== Full Description: ==
'''[http://arduino.cc/ Arduino]''' is an amazingly powerful tool that is very simple to learn to use. It was designed so that artists and non-geeks can start from nothing, and make something cool happen in less than 90 minutes. Yet, it is powerful enough so that experienced expert geeks can use it for their projects as well.

This workshop is easy enough for '''''total newbies''''' to '''learn all you need to know to get going on an Arduino.'''

Participants will make their own Arduino clone, and set it up on solderless breadboards to make their own [http://www.tvbgone.com TV-B-Gone] remote control to turn off TVs in public places -- a fun way to learn Arduino (and electronics) basics. Bring your laptop, if you can.

Taught by [http://en.wikipedia.org/wiki/Mitch_Altman Mitch Altman].

''Big thanks to Ken Shirriff, who came up with the original [http://www.arcfn.com/2009/12/tv-b-gone-for-arduino.html TV-B-Gone for Arduino].''

'''''Optional''''': Bring your laptop if you want to go home with the free Arduino software installed on it. 
Arduino software runs on Windows, MacOS and Linux._ 

'''Materials costs''': 
The workshop is free, but if you would like to partake in the hands-on aspects of the workshop, Mitch will have materials for '''€40''' (useful for making many different cool projects).

'''Workshop page:''' 
[http://cornfieldelectronics.com/cfe/projects/tvbg_arduino/tvbg_arduino_workshop.php Arduino For Total Newbies workshop page]

== Workshop Itinerary ==
* Intro to Arduino

* Very short lesson to learn everything you need to know about electronics!

* Then we will learn to solder. Don't let this scare you! I've taught tens of thousands of people to solder, most of whom have never made anything before in their lives. It is actually a very easy skill to learn. It is also very useful.

* Then we will each make our own Arduino clone from a kit made by Samurai Circuits: [https://cornfieldelectronics.com/cfe/u_do_it_duino_complete.php U-Do-It-Duino].

* Now that we each have our own Arduino board, we will set up the free and open-source Arduino software on our laptops (if you bring one) -- Windows, Linux, and MacOS are all fine!

* And then its time to make something and learn how easy it is to use Arduino! I'll (very easily!) show you how to read schematic diagrams, and you'll put together your own TV-B-Gone remote control using your Arduino clone board. We will use a solderless breadboard. These are really useful, and provide a fast, and very easy way to put circuits together without needing to solder.

* Target practice is available all over the world after the workshop.

== Summary ==
     '''What''': [http://arduino.cc/ Arduino] workshop for total newbies, using [http://www.tvbgone.com TV-B-Gone] remote controls as an intro 

     '''When''': 2:00pm-5:30pm, Day 3 (10-August, Sunday) 
     '''Where''': Hardware Hacking Area Village (see map, below) 
     '''Who''': Anyone and everyone can have fun learning Arduino. Ages 10 to 100 
     '''Max #''': 35 participants -- '''''This workshop will fill up, so please do arrive early!''''' 
     '''Cost''': €40 for materials -- includes everything you need to make your [http://www.arcfn.com/2009/12/tv-b-gone-for-arduino.html Arduino TV-B-Gone]! 
          And you get to bring home your [http://www.arcfn.com/2009/12/tv-b-gone-for-arduino.html Arduino TV-B-Gone] and all materials to play with Arduino at home (or wherever you want). 

     '''Instructor''': [https://en.wikipedia.org/wiki/Mitch_Altman Mitch Altman]

     '''website:''' [http://cornfieldelectronics.com/cfe/projects/tvbg_arduino/tvbg_arduino_workshop.php Arduino For Total Newbies workshop page] 

'''Buy a kit to guarantee a seat, or come by early! (And please do arrive early, regardless!)''' 
 
'''''Optional''': Bring your laptop if you want to go home with the free Arduino software installed on it. Arduino software runs on Windows, MacOS and Linux.''

== Links: ==
'''[http://cornfieldelectronics.com/cfe/projects/tvbg_arduino/tvbg_arduino_workshop.php Arduino For Total Newbies webpage] '''
[http://www.tvbgone.com TV-B-Gone website] 
[http://www.arduino.cc/ Ardiuno website] 
[http://www.arcfn.com/2009/12/tv-b-gone-for-arduino.html Ken Shirriff's TV-B-Gone Arduino project page] 
[https://cornfieldelectronics.com/cfe/u_do_it_duino_complete.php U-Do-It-Duino] 


==Contact==
'''Mitch Altman''': <mitch AT CornfieldElectronics DOT com> 
'''DECT''': 2676 (CORN)

== Map ==
[[File:HHA_map_WHY.jpg|600px|left|Location of Hardware Hacking Area Village]]

LED Strips Everywhere

2025-07-31T23:49:26Z

Maltman23: change for WHY

= LED Strips Everywhere for Everyone! workshop =

This workshop will be given: 

   Day 3: Sunday, 10-August, 9:30pm - 11:00pm 
 
'''NOTE: You do NOT need to register to take this workshop -- please show up early to ensure a seat at the Hardware Hacking Area Village.''' 
 

== Abstract ==
''Learn how to program LED strips. It's super easy and fun to make your life trippy and beautiful. For total beginners. ''
[[File:LEDstrip.jpg|center|500px|Making an LED strip do its thing]]Learn how to light up LED strips with a cheap Arduino, and make your life trippy and beautiful!
 
'''For total beginners''' -- no knowledge needed at all. 

== Presenter ==
[http://en.wikipedia.org/wiki/Mitch_Altman Mitch Altman].
 

== Full Description ==
[[File:35C3_LEDstrip_tunnel.jpg|center|500px|LED strip tunnel at 35C3, Leipzig, Germany]] 
LED strips have become really inexpensive. And many people have created easy methods of controlling the color and brightness of individual LEDs in LED strips. This workshop will show you one easy and fun way to control LED strips, and to make them do what you want. I'll show you everything you need to know to use existing Arduino programs -- and how to hack Arduino programs -- to control the colors in your world with LED strips.

== Workshop Itinerary ==
* Intro to Red-Green-Blue (RGB) LEDs 
* Brief intro to Arduino 
* How to use an Arduino to control an LED strip 
* Some demos of programs you can download 

== Materials cost ==
The workshop is free, but if you would like to partake in the hands-on aspects of the workshop, Mitch will have materials for '''€20'''. 

== Registration -- NOT required ==
'''You do not need to register in advance to take this workshop -- just show up early to ensure a seat.''': 

== Software ==
''Optional'': Bring your laptop if you want to go home with the free Arduino software installed on it. 
Arduino software runs on Windows, MacOS and Linux.: 
[https://www.arduino.cc/en/Main/Software Arduino software]

== Summary ==
     '''What''': Learn to program LED strips and make your life trippy 

     '''When''': 9:30pm to 11:00pm, Day 3 (Sunday, August 10th) 
     '''Where''': Hardware Hacking Area Village (see Map, below) 
     '''Who''': Anyone and everyone can learn to program LED strips. Ages 10 to 100 
     '''Max #''': 50 participants -- '''''This workshop will fill up, so please do arrive early!''''' 
     '''Cost''': €20 for materials 

     '''Instructor''': [https://en.wikipedia.org/wiki/Mitch_Altman Mitch Altman]

     '''website:''' [https://cornfieldelectronics.com/cfe/projects.php#ledstrips LED Strips Everywhere for Everyone!] 

'''Buy a kit to guarantee a seat, or come by early! (And please do arrive early, regardless!)''' 
 
'''''Optional''': Bring your laptop if you want to go home with the free Arduino software installed on it. Arduino software runs on Windows, MacOS and Linux.''

== Links ==
[https://cornfieldelectronics.com/cfe/projects.php#ledstrips More info about the '''LED Strips Everywhere for Everyone!''' workshop] 
[http://www.arduino.cc/ Ardiuno website] 

== Map ==
[[File:HHA_map_WHY.jpg|600px|left|Location of Hardware Hacking Area Village]]

I Can Solder

2025-07-31T22:06:06Z

Maltman23: /* Learn to Solder */ change for WHY

= Learn to Solder =
[[File:solderbadge_White_and_Blinky_ON_v2.jpg|center|500px|"I Can Solder" Badge kit]] 

This workshop will be given: 
   Day 2: Saturday, 9-August, 1:00 - 2:00 

'''NOTE: You do NOT need to register to take this workshop -- please show up early to ensure a seat at the Hardware Hacking Area Village.''' 

== Abstract ==
'''''Anyone'' can learn to solder!''' 
It is useful and fun. 
This workshop is for '''kids of all ages''' (and anyone of any age). 
 
We will learn this wonderful skill by making a blinky-badge kit, so you can wear blinky-lights wherever you go. 

== Presenter ==
[http://en.wikipedia.org/wiki/Mitch_Altman Mitch Altman].
 

== Full Description ==

[[File:Learn_to_Solder_GPN21.jpg|right|500px|Learn To Solder workshop at GPN21]] 
 
Learn to solder by making a cool badge that you can wear, and have blinky-lights wherever you go.

The '''[https://cornfieldelectronics.com/cfe/projects.php#solderbadge "I Can Solder!" Badge kit]''' is a very simple [https://github.com/maltman23/I-Can-Solder--Badge-kit-V2 open hardware] kit that anyone can use for learning to solder.
 
''This workshop is for'' '''total newbies''' ''to learn to solder. All ages.''

== Workshop Itinerary ==
* Brief overview of electronics
* The background of soldering, so you will solder well for the rest of your life
* Step by step instructions for soldering your "I Can Solder!" Badge kit
* Wear Blinky-Lights wherever you go

== Materials cost ==
The workshop is free, but if you would like to partake in the hands-on aspects of the workshop, Mitch will have materials for '''€10'''. 

== Registration -- NOT required ==
'''You do not need to register in advance to take this workshop -- just show up early to ensure a seat.''': 

== Summary ==
     '''What''': Make an [https://cornfieldelectronics.com/cfe/projects.php#solderbadge "I Can Solder" Badge kit] 

     '''When''': 1:00pm to 2:00pm Day 2 (Saturday, August 9th) 
     '''Where''': Hardware Hacking Area Village (see Map, below) 
     '''Who''': Anyone and everyone can learn to solder -- all ages 
     '''Max #''': 40 participants -- '''''This workshop will fill up, so please do arrive early!''''' 
     '''Cost''': €10 for materials 

     '''Instructor''': [https://en.wikipedia.org/wiki/Mitch_Altman Mitch Altman]

     '''website:''' [https://cornfieldelectronics.com/cfe/projects.php#solderbadge "I Can Solder" Badge kit] 

'''Buy a kit to guarantee a seat, or come by early! (And please do arrive early, regardless!)''' 

== Links: ==
[https://cornfieldelectronics.com/cfe/projects.php#solderbadge "I Can Solder" Badge kit] 
[https://github.com/maltman23/I-Can-Solder--Badge-kit-V2 "I Can Solder" Badge kit Github page]

==Contact==
'''Mitch Altman''': <mitch AT CornfieldElectronics DOT com> 
'''DECT''': 2676 (CORN)

== Map ==
[[File:HHA_map_WHY.jpg|600px|left|Location of Hardware Hacking Area Village]]

I Can Solder

2025-07-31T22:02:18Z

Maltman23: /* Map */ change for WHY

= Learn to Solder =
[[File:solderbadge_White_and_Blinky_ON_v2.jpg|center|500px|"I Can Solder" Badge kit]] 

This workshop will be given: 

   Day 3: Sunday, 29-December, 18:30 - 19:30 

'''NOTE: You do NOT need to register to take this workshop -- please show up early to ensure a seat at the Hardware Hacking Area.''' 

== Abstract ==
'''''Anyone'' can learn to solder!''' 
It is useful and fun. 
This workshop is for '''kids of all ages''' (and anyone of any age). 
 
We will learn this wonderful skill by making a blinky-badge kit, so you can wear blinky-lights wherever you go. 

== Presenter ==
[http://en.wikipedia.org/wiki/Mitch_Altman Mitch Altman].
 

== Full Description ==

[[File:Learn_to_Solder_GPN21.jpg|right|500px|Learn To Solder workshop at GPN21]] 
 
Learn to solder by making a cool badge that you can wear, and have blinky-lights wherever you go.

The '''[https://cornfieldelectronics.com/cfe/projects.php#solderbadge "I Can Solder!" Badge kit]''' is a very simple [https://github.com/maltman23/I-Can-Solder--Badge-kit-V2 open hardware] kit that anyone can use for learning to solder.
 
''This workshop is for'' '''total newbies''' ''to learn to solder. All ages.''

== Workshop Itinerary ==
* Brief overview of electronics
* The background of soldering, so you will solder well for the rest of your life
* Step by step instructions for soldering your "I Can Solder!" Badge kit
* Wear Blinky-Lights wherever you go

== Materials cost ==
The workshop is free, but if you would like to partake in the hands-on aspects of the workshop, Mitch will have materials for '''€10'''. 

== Registration -- NOT required ==
'''You do not need to register in advance to take this workshop -- just show up early to ensure a seat.''': 

== Summary ==
     '''What''': Make an [https://cornfieldelectronics.com/cfe/projects.php#solderbadge "I Can Solder" Badge kit] 

     '''When''': 6:30pm to 7:30pm Day 3 (Sunday, December 30th) 
     '''Where''': Hardware Hacking Area (see Map, below) 
     '''Who''': Anyone and everyone can learn to solder -- all ages 
     '''Max #''': 50 participants -- '''''This workshop will fill up, so please do arrive early!''''' 
     '''Cost''': €10 for materials 

     '''Instructor''': [https://en.wikipedia.org/wiki/Mitch_Altman Mitch Altman]

     '''website:''' [https://cornfieldelectronics.com/cfe/projects.php#solderbadge "I Can Solder" Badge kit] 

'''Buy a kit to guarantee a seat, or come by early! (And please do arrive early, regardless!)''' 

== Links: ==
[https://cornfieldelectronics.com/cfe/projects.php#solderbadge "I Can Solder" Badge kit] 
[https://github.com/maltman23/I-Can-Solder--Badge-kit-V2 "I Can Solder" Badge kit Github page]

==Contact==
'''Mitch Altman''': <mitch AT CornfieldElectronics DOT com> 
'''DECT''': 2676 (CORN)

== Map ==
[[File:HHA_map_WHY.jpg|600px|left|Location of Hardware Hacking Area Village]]

ArduTouch

2025-07-30T23:32:53Z

Maltman23: /* Map */ change for WHY

= '''Music Generation for Newbies / Learn to Solder workshop -- ArduTouch music synthesizer''' =
[[Image:ArduTouch.jpg|center|500px|ArduTouch music synthesizer kit]] 
 
==''Anyone can learn to solder!'' ''And anyone can learn to make music, sound (and noise!) with computer chips!'' All participants will easily learn all of this by making an '''[https://cornfieldelectronics.com/cfe/projects.php#ardutouch ArduTouch music synthesizer]''' from a kit.         '''For total beginners.''' ==
 
This workshop will be given: 
   Day 2: Saturday, 9-August, 8:00pm - 10:30pm 
 
'''NOTE: You do NOT need to register to take this workshop -- please show up early to ensure a seat at the Hardware Hacking Area Village.''' 
 

== Abstract: ==
[[File:ArduTouchWorkshopEMF.jpg|right|500px|ArduTouch workshop at EMF Camp 2018]] 

 
[https://cornfieldelectronics.com/cfe/projects.php#ardutouch ArduTouch] is an [https://github.com/maltman23/ArduTouch open source] '''Ardu'''ino-compatible music synthesizer kit with a built-in '''touch''' keyboard, and with built-in speaker/amplifier. 

 
This workshop is for '''''total newbies''''' to '''learn to solder''' and make their own ArduTouch music synthesizer. 

This workshop is for '''''total newbies''''' to '''learn the basics of how to make sound with computer chips.''' 

The ArduTouch comes pre-programmed with a way cool synthesizer. And I will show you how to re-program it with other way cool (and totally different) synthesizers, and how to make your own synthesizers. 

'''When''': 

   Day 2 (August 9th, Saturday): 8:00pm - 10:30pm

== Full Description: ==
'''Learn to solder''' by making a way-cool, powerful music synthesizer, and 
'''learn how to make cool music, sound, (and noise!) with computer chips''' 
(The fancy word for making sound with a computer chip is ''Digital Signal Processing'' or ''DSP''). 
 
'''[https://cornfieldelectronics.com/cfe/projects.php#ardutouch ArduTouch]''' is an open hardware '''Ardu'''ino-compatible music synthesizer kit with a built-in '''Touch''' Keyboard, and with built-in speaker/amplifier. It is a really nice performing musical instrument. 
 
This workshop is for '''total newbies''' to learn to solder. 
This workshop is for '''total newbies''' to make their own ArduTouch music synthesizer and learn to make music, sound (and noise!) with computer chips. Attendees take their completed synthesiser home at the end of the workshop. 
 
The ArduTouch comes pre-programmed with a way cool synthesizer. And I will show you how to re-program it with other way cool (and totally different) synthesizers, as well as how to make your own synthesizers. 
 
For ages 10 - 100. 
 
Taught by [http://en.wikipedia.org/wiki/Mitch_Altman Mitch Altman]. 
 
'''''Optional''': Bring your laptop if you want to go home with the free Arduino software installed on it. Arduino software runs on Windows, MacOS and Linux.''

'''Materials costs''' 
The workshop is free, but if you would like to partake in the hands-on aspects of the workshop, Mitch will have ArduTouch kits for '''€35'''. 
''Optional'': USB-Serial Cable for re-programming ArduTouch (and many other projects): 5 €.'''

== Workshop Itinerary ==
* Intro to music synthesis

* Basics of making sound with computer chips (Digital Signal Processing)

* Basics of using an Arduino

* Learn to solder. Don't let this scare you! I've taught tens of thousands of people to solder, most of whom have never made anything before in their lives. It is actually a very easy skill to learn. It is also very useful.

* How to re-program your ArduTouch music synthesizer to make lots of cool music, sounds, (and noise!)

== Summary ==
     '''What''': Make an [https://cornfieldelectronics.com/cfe/projects.php#ardutouch ArduTouch music synthesizer] 

     '''When''': 8:00pm to 10:30pm, Day 2 (Saturday, August 9th) 
     '''Where''': Hardware Hacking Area Village (see Map, below) 
     '''Who''': Anyone and everyone can have fun making the ArduTouch music synthesizer Ages 10 to 100 
     '''Max #''': 35 participants -- '''''This workshop will fill up, so please do arrive early!''''' 
     '''Cost''': €35 for materials -- (€40 if you also want a USB-Serial cable for re-programming the ArduTouch) 

     '''Instructor''': [https://en.wikipedia.org/wiki/Mitch_Altman Mitch Altman]

     '''website:''' [https://cornfieldelectronics.com/cfe/projects.php#ardutouch ArduTouch music synthesizer kit] 

'''Buy a kit to guarantee a seat, or come by early! (And please do arrive early, regardless!)''' 
 
'''''Optional''': Bring your laptop if you want to go home with the free Arduino software installed on it. Arduino software runs on Windows, MacOS and Linux.''

== Links: ==
[https://cornfieldelectronics.com/cfe/projects.php#ardutouch ArduTouch music synthesizer kit] 
[http://www.arduino.cc/ Ardiuno website] 
[https://github.com/maltman23/ArduTouch ArduTouch Github page]

==Contact==
'''Mitch Altman''': <mitch AT CornfieldElectronics DOT com> 
'''DECT''': 2676 (CORN)

== Map ==
[[File:HHA_map_WHY.jpg|600px|left|Location of Hardware Hacking Area Village]]

File:HHA map WHY.jpg

2025-07-30T23:32:35Z

Maltman23: map of Why showing location of Hardware Hacking Area Village

== Summary ==
map of Why showing location of Hardware Hacking Area Village

ArduTouch

2025-07-30T23:29:18Z

Maltman23: /* Summary */ change for WHY

= '''Music Generation for Newbies / Learn to Solder workshop -- ArduTouch music synthesizer''' =
[[Image:ArduTouch.jpg|center|500px|ArduTouch music synthesizer kit]] 
 
==''Anyone can learn to solder!'' ''And anyone can learn to make music, sound (and noise!) with computer chips!'' All participants will easily learn all of this by making an '''[https://cornfieldelectronics.com/cfe/projects.php#ardutouch ArduTouch music synthesizer]''' from a kit.         '''For total beginners.''' ==
 
This workshop will be given: 
   Day 2: Saturday, 9-August, 8:00pm - 10:30pm 
 
'''NOTE: You do NOT need to register to take this workshop -- please show up early to ensure a seat at the Hardware Hacking Area Village.''' 
 

== Abstract: ==
[[File:ArduTouchWorkshopEMF.jpg|right|500px|ArduTouch workshop at EMF Camp 2018]] 

 
[https://cornfieldelectronics.com/cfe/projects.php#ardutouch ArduTouch] is an [https://github.com/maltman23/ArduTouch open source] '''Ardu'''ino-compatible music synthesizer kit with a built-in '''touch''' keyboard, and with built-in speaker/amplifier. 

 
This workshop is for '''''total newbies''''' to '''learn to solder''' and make their own ArduTouch music synthesizer. 

This workshop is for '''''total newbies''''' to '''learn the basics of how to make sound with computer chips.''' 

The ArduTouch comes pre-programmed with a way cool synthesizer. And I will show you how to re-program it with other way cool (and totally different) synthesizers, and how to make your own synthesizers. 

'''When''': 

   Day 2 (August 9th, Saturday): 8:00pm - 10:30pm

== Full Description: ==
'''Learn to solder''' by making a way-cool, powerful music synthesizer, and 
'''learn how to make cool music, sound, (and noise!) with computer chips''' 
(The fancy word for making sound with a computer chip is ''Digital Signal Processing'' or ''DSP''). 
 
'''[https://cornfieldelectronics.com/cfe/projects.php#ardutouch ArduTouch]''' is an open hardware '''Ardu'''ino-compatible music synthesizer kit with a built-in '''Touch''' Keyboard, and with built-in speaker/amplifier. It is a really nice performing musical instrument. 
 
This workshop is for '''total newbies''' to learn to solder. 
This workshop is for '''total newbies''' to make their own ArduTouch music synthesizer and learn to make music, sound (and noise!) with computer chips. Attendees take their completed synthesiser home at the end of the workshop. 
 
The ArduTouch comes pre-programmed with a way cool synthesizer. And I will show you how to re-program it with other way cool (and totally different) synthesizers, as well as how to make your own synthesizers. 
 
For ages 10 - 100. 
 
Taught by [http://en.wikipedia.org/wiki/Mitch_Altman Mitch Altman]. 
 
'''''Optional''': Bring your laptop if you want to go home with the free Arduino software installed on it. Arduino software runs on Windows, MacOS and Linux.''

'''Materials costs''' 
The workshop is free, but if you would like to partake in the hands-on aspects of the workshop, Mitch will have ArduTouch kits for '''€35'''. 
''Optional'': USB-Serial Cable for re-programming ArduTouch (and many other projects): 5 €.'''

== Workshop Itinerary ==
* Intro to music synthesis

* Basics of making sound with computer chips (Digital Signal Processing)

* Basics of using an Arduino

* Learn to solder. Don't let this scare you! I've taught tens of thousands of people to solder, most of whom have never made anything before in their lives. It is actually a very easy skill to learn. It is also very useful.

* How to re-program your ArduTouch music synthesizer to make lots of cool music, sounds, (and noise!)

== Summary ==
     '''What''': Make an [https://cornfieldelectronics.com/cfe/projects.php#ardutouch ArduTouch music synthesizer] 

     '''When''': 8:00pm to 10:30pm, Day 2 (Saturday, August 9th) 
     '''Where''': Hardware Hacking Area Village (see Map, below) 
     '''Who''': Anyone and everyone can have fun making the ArduTouch music synthesizer Ages 10 to 100 
     '''Max #''': 35 participants -- '''''This workshop will fill up, so please do arrive early!''''' 
     '''Cost''': €35 for materials -- (€40 if you also want a USB-Serial cable for re-programming the ArduTouch) 

     '''Instructor''': [https://en.wikipedia.org/wiki/Mitch_Altman Mitch Altman]

     '''website:''' [https://cornfieldelectronics.com/cfe/projects.php#ardutouch ArduTouch music synthesizer kit] 

'''Buy a kit to guarantee a seat, or come by early! (And please do arrive early, regardless!)''' 
 
'''''Optional''': Bring your laptop if you want to go home with the free Arduino software installed on it. Arduino software runs on Windows, MacOS and Linux.''

== Links: ==
[https://cornfieldelectronics.com/cfe/projects.php#ardutouch ArduTouch music synthesizer kit] 
[http://www.arduino.cc/ Ardiuno website] 
[https://github.com/maltman23/ArduTouch ArduTouch Github page]

==Contact==
'''Mitch Altman''': <mitch AT CornfieldElectronics DOT com> 
'''DECT''': 2676 (CORN)

== Map ==
[[File:38C3_Hardware_Hacking_Area_Map.jpg|600px|left|Location of Hardware Hacking Area (in Hall 3)]]

ArduTouch

2025-07-30T23:27:57Z

Maltman23: /* Abstract: */ change for WHY

= '''Music Generation for Newbies / Learn to Solder workshop -- ArduTouch music synthesizer''' =
[[Image:ArduTouch.jpg|center|500px|ArduTouch music synthesizer kit]] 
 
==''Anyone can learn to solder!'' ''And anyone can learn to make music, sound (and noise!) with computer chips!'' All participants will easily learn all of this by making an '''[https://cornfieldelectronics.com/cfe/projects.php#ardutouch ArduTouch music synthesizer]''' from a kit.         '''For total beginners.''' ==
 
This workshop will be given: 
   Day 2: Saturday, 9-August, 8:00pm - 10:30pm 
 
'''NOTE: You do NOT need to register to take this workshop -- please show up early to ensure a seat at the Hardware Hacking Area Village.''' 
 

== Abstract: ==
[[File:ArduTouchWorkshopEMF.jpg|right|500px|ArduTouch workshop at EMF Camp 2018]] 

 
[https://cornfieldelectronics.com/cfe/projects.php#ardutouch ArduTouch] is an [https://github.com/maltman23/ArduTouch open source] '''Ardu'''ino-compatible music synthesizer kit with a built-in '''touch''' keyboard, and with built-in speaker/amplifier. 

 
This workshop is for '''''total newbies''''' to '''learn to solder''' and make their own ArduTouch music synthesizer. 

This workshop is for '''''total newbies''''' to '''learn the basics of how to make sound with computer chips.''' 

The ArduTouch comes pre-programmed with a way cool synthesizer. And I will show you how to re-program it with other way cool (and totally different) synthesizers, and how to make your own synthesizers. 

'''When''': 

   Day 2 (August 9th, Saturday): 8:00pm - 10:30pm

== Full Description: ==
'''Learn to solder''' by making a way-cool, powerful music synthesizer, and 
'''learn how to make cool music, sound, (and noise!) with computer chips''' 
(The fancy word for making sound with a computer chip is ''Digital Signal Processing'' or ''DSP''). 
 
'''[https://cornfieldelectronics.com/cfe/projects.php#ardutouch ArduTouch]''' is an open hardware '''Ardu'''ino-compatible music synthesizer kit with a built-in '''Touch''' Keyboard, and with built-in speaker/amplifier. It is a really nice performing musical instrument. 
 
This workshop is for '''total newbies''' to learn to solder. 
This workshop is for '''total newbies''' to make their own ArduTouch music synthesizer and learn to make music, sound (and noise!) with computer chips. Attendees take their completed synthesiser home at the end of the workshop. 
 
The ArduTouch comes pre-programmed with a way cool synthesizer. And I will show you how to re-program it with other way cool (and totally different) synthesizers, as well as how to make your own synthesizers. 
 
For ages 10 - 100. 
 
Taught by [http://en.wikipedia.org/wiki/Mitch_Altman Mitch Altman]. 
 
'''''Optional''': Bring your laptop if you want to go home with the free Arduino software installed on it. Arduino software runs on Windows, MacOS and Linux.''

'''Materials costs''' 
The workshop is free, but if you would like to partake in the hands-on aspects of the workshop, Mitch will have ArduTouch kits for '''€35'''. 
''Optional'': USB-Serial Cable for re-programming ArduTouch (and many other projects): 5 €.'''

== Workshop Itinerary ==
* Intro to music synthesis

* Basics of making sound with computer chips (Digital Signal Processing)

* Basics of using an Arduino

* Learn to solder. Don't let this scare you! I've taught tens of thousands of people to solder, most of whom have never made anything before in their lives. It is actually a very easy skill to learn. It is also very useful.

* How to re-program your ArduTouch music synthesizer to make lots of cool music, sounds, (and noise!)

== Summary ==
     '''What''': Make an [https://cornfieldelectronics.com/cfe/projects.php#ardutouch ArduTouch music synthesizer] 

     '''When''': 1:00pm to 3:30pm, Day 4 (Monday, December 30th) 
     '''Where''': Hardware Hacking Area (see Map, below) 
     '''Who''': Anyone and everyone can have fun making the ArduTouch music synthesizer Ages 10 to 100 
     '''Max #''': 50 participants -- '''''This workshop will fill up, so please do arrive early!''''' 
     '''Cost''': €35 for materials -- (€40 if you also want a USB-Serial cable for re-programming the ArduTouch) 

     '''Instructor''': [https://en.wikipedia.org/wiki/Mitch_Altman Mitch Altman]

     '''website:''' [https://cornfieldelectronics.com/cfe/projects.php#ardutouch ArduTouch music synthesizer kit] 

'''Buy a kit to guarantee a seat, or come by early! (And please do arrive early, regardless!)''' 
 
'''''Optional''': Bring your laptop if you want to go home with the free Arduino software installed on it. Arduino software runs on Windows, MacOS and Linux.''

== Links: ==
[https://cornfieldelectronics.com/cfe/projects.php#ardutouch ArduTouch music synthesizer kit] 
[http://www.arduino.cc/ Ardiuno website] 
[https://github.com/maltman23/ArduTouch ArduTouch Github page]

==Contact==
'''Mitch Altman''': <mitch AT CornfieldElectronics DOT com> 
'''DECT''': 2676 (CORN)

== Map ==
[[File:38C3_Hardware_Hacking_Area_Map.jpg|600px|left|Location of Hardware Hacking Area (in Hall 3)]]

ArduTouch

2025-07-30T23:26:47Z

= '''Music Generation for Newbies / Learn to Solder workshop -- ArduTouch music synthesizer''' =
[[Image:ArduTouch.jpg|center|500px|ArduTouch music synthesizer kit]] 
 
==''Anyone can learn to solder!'' ''And anyone can learn to make music, sound (and noise!) with computer chips!'' All participants will easily learn all of this by making an '''[https://cornfieldelectronics.com/cfe/projects.php#ardutouch ArduTouch music synthesizer]''' from a kit.         '''For total beginners.''' ==
 
This workshop will be given: 
   Day 2: Saturday, 9-August, 8:00pm - 10:30pm 
 
'''NOTE: You do NOT need to register to take this workshop -- please show up early to ensure a seat at the Hardware Hacking Area Village.''' 
 

== Abstract: ==
[[File:ArduTouchWorkshopEMF.jpg|right|500px|ArduTouch workshop at EMF Camp 2018]] 

 
[https://cornfieldelectronics.com/cfe/projects.php#ardutouch ArduTouch] is an [https://github.com/maltman23/ArduTouch open source] '''Ardu'''ino-compatible music synthesizer kit with a built-in '''touch''' keyboard, and with built-in speaker/amplifier. 

 
This workshop is for '''''total newbies''''' to '''learn to solder''' and make their own ArduTouch music synthesizer. 

This workshop is for '''''total newbies''''' to '''learn the basics of how to make sound with computer chips.''' 

The ArduTouch comes pre-programmed with a way cool synthesizer. And I will show you how to re-program it with other way cool (and totally different) synthesizers, and how to make your own synthesizers. 

'''When''': 

   Day 4 (December 30th, Monday): 1:00pm - 3:30pm

== Full Description: ==
'''Learn to solder''' by making a way-cool, powerful music synthesizer, and 
'''learn how to make cool music, sound, (and noise!) with computer chips''' 
(The fancy word for making sound with a computer chip is ''Digital Signal Processing'' or ''DSP''). 
 
'''[https://cornfieldelectronics.com/cfe/projects.php#ardutouch ArduTouch]''' is an open hardware '''Ardu'''ino-compatible music synthesizer kit with a built-in '''Touch''' Keyboard, and with built-in speaker/amplifier. It is a really nice performing musical instrument. 
 
This workshop is for '''total newbies''' to learn to solder. 
This workshop is for '''total newbies''' to make their own ArduTouch music synthesizer and learn to make music, sound (and noise!) with computer chips. Attendees take their completed synthesiser home at the end of the workshop. 
 
The ArduTouch comes pre-programmed with a way cool synthesizer. And I will show you how to re-program it with other way cool (and totally different) synthesizers, as well as how to make your own synthesizers. 
 
For ages 10 - 100. 
 
Taught by [http://en.wikipedia.org/wiki/Mitch_Altman Mitch Altman]. 
 
'''''Optional''': Bring your laptop if you want to go home with the free Arduino software installed on it. Arduino software runs on Windows, MacOS and Linux.''

'''Materials costs''' 
The workshop is free, but if you would like to partake in the hands-on aspects of the workshop, Mitch will have ArduTouch kits for '''€35'''. 
''Optional'': USB-Serial Cable for re-programming ArduTouch (and many other projects): 5 €.'''

== Workshop Itinerary ==
* Intro to music synthesis

* Basics of making sound with computer chips (Digital Signal Processing)

* Basics of using an Arduino

* Learn to solder. Don't let this scare you! I've taught tens of thousands of people to solder, most of whom have never made anything before in their lives. It is actually a very easy skill to learn. It is also very useful.

* How to re-program your ArduTouch music synthesizer to make lots of cool music, sounds, (and noise!)

== Summary ==
     '''What''': Make an [https://cornfieldelectronics.com/cfe/projects.php#ardutouch ArduTouch music synthesizer] 

     '''When''': 1:00pm to 3:30pm, Day 4 (Monday, December 30th) 
     '''Where''': Hardware Hacking Area (see Map, below) 
     '''Who''': Anyone and everyone can have fun making the ArduTouch music synthesizer Ages 10 to 100 
     '''Max #''': 50 participants -- '''''This workshop will fill up, so please do arrive early!''''' 
     '''Cost''': €35 for materials -- (€40 if you also want a USB-Serial cable for re-programming the ArduTouch) 

     '''Instructor''': [https://en.wikipedia.org/wiki/Mitch_Altman Mitch Altman]

     '''website:''' [https://cornfieldelectronics.com/cfe/projects.php#ardutouch ArduTouch music synthesizer kit] 

'''Buy a kit to guarantee a seat, or come by early! (And please do arrive early, regardless!)''' 
 
'''''Optional''': Bring your laptop if you want to go home with the free Arduino software installed on it. Arduino software runs on Windows, MacOS and Linux.''

== Links: ==
[https://cornfieldelectronics.com/cfe/projects.php#ardutouch ArduTouch music synthesizer kit] 
[http://www.arduino.cc/ Ardiuno website] 
[https://github.com/maltman23/ArduTouch ArduTouch Github page]

==Contact==
'''Mitch Altman''': <mitch AT CornfieldElectronics DOT com> 
'''DECT''': 2676 (CORN)

== Map ==
[[File:38C3_Hardware_Hacking_Area_Map.jpg|600px|left|Location of Hardware Hacking Area (in Hall 3)]]

User:Maltman23

2025-05-19T17:09:54Z

Maltman23: Add WHY template

{{Person
|nickname=Mitch
|email=mitch@CornfieldElectronics.com
|matrix_nick=maltman23
|matrix_server=matrix.org
|mastodon_nick=maltman23
|mastodon_server=mastodon.social
}}

Mitch is a Berlin-based hacker and inventor, best known for inventing [http://tvbgone.com TV-B-Gone remote controls], a keychain that turns off TVs in public places, he was also co-founder of [http://en.wikipedia.org/wiki/3ware 3ware] (a SillyValley RAID controller company), and did pioneering work in Virtual Reality at [http://en.wikipedia.org/wiki/VPL_Research VPL Research]. He has contributed to [https://makezine.com/author/mitch-altman/ MAKE Magazine], has written for [https://www.2600.com/ 2600], and [http://www.makery.info/en Makery], and wrote a chapter from the popular book, [http://www.amazon.com/Maker-Pro-John-Baichtal/dp/1457186187 Maker Pro]. For the last many years Mitch has been leading workshops around the world, teaching people to make cool things with microcontrollers and teaching everyone to [http://mightyohm.com/soldercomic solder]. Mitch promotes hackerspaces, open source hardware, and mentors others wherever he goes. He is also co-founder of [https://noisebridge.net/ Noisebridge], and President and CEO of [http://www.CornfieldElectronics.com Cornfield Electronics].

Mitch's [http://en.wikipedia.org/wiki/Mitch_Altman Wikipedia page]

Mitch's talk on [https://www.youtube.com/watch?v=WkiX7R1-kaY TEDxBrussels talk: "The Hackerspace Movement"]

Contact email: '''mitch''' ''**at**'' '''CornfieldElectronics''' ''**dot**'' '''com''' 
DECT: 2676 (CORN) 
Twitter: [https://twitter.com/maltman23 @maltman23] 
Facebook: [https://www.facebook.com/maltman23 maltman23] 
LinkedIn: [https://www.linkedin.com/pub/mitch-altman/1/493/736 Mitch Altman] 
Diaspora: [https://diaspora.koehn.com/u/maltman23 maltman23] 
Flickr: [https://www.flickr.com/photos/maltman23/sets maltman23] 

Please feel free to contact me for any reason, any time.

{{WHY2025
|why2025_participating=Yes
|why2025_arrival=2025-08-06T02:00:00.000Z
|why2025_departure=2025-08-13T23:59:59.999Z
|why2025_plus_x=0
|why2024_dect=2676
}}

GPN23

2025-05-03T14:48:26Z

Maltman23: /* Ticket exchange */

== GPN23 ==

https://entropia.de/GPN23

=== Ticket exchange ===

==== Needs tickets ====

# nandequandale
# boreq
# ryd
# <s>maltman23</s>

==== Wants to get rid of tickets ====

#